Author Topic: Fi light comes on during fast acceleration (Read 12832 times) Tweet

mcclay811 · « **on:** September 17, 2014, 03:30:26 PM »

My fuel injection light comes on when I accelerate hard. I don't understand.

TT · « **Reply #1 on:** September 17, 2014, 05:15:19 PM »

Quote from: mcclay811 on September 17, 2014, 03:30:26 PM

My fuel injection light comes on when I accelerate hard. I don't understand.

what generation / what year is it?? r there any codes ???

Rocketgeezer · « **Reply #2 on:** September 17, 2014, 07:42:59 PM »

Quote from: mcclay811 on September 17, 2014, 03:30:26 PM

My fuel injection light comes on when I accelerate hard. I don't understand.

Are there any mods done to the bike, pipe, PC, turbo, nitrous, no matter, get yourself a shop manual, it will say where the diagnostic plug is and how to ck for codes, or take it to a good reputable shop, because trying to diagnose this way on the forums, unless you are a real quik study on diagnostics, is next to useless, if you provide us with good info, you may get lucky, there are a lot of very well informed guys here and we have a few very well respected pros, but if you do like I said you should at least find what the problem may be, or give you a direction to start with

mcclay811 · « **Reply #3 on:** September 17, 2014, 08:22:24 PM »

It is a 2010 it has a full Yoshi and pc5+autotune. Sorry I didn't ad more info

Assassin8 · « **Reply #4 on:** October 22, 2014, 03:14:56 PM »

Quote from: mcclay811 on September 17, 2014, 08:22:24 PM

It is a 2010 it has a full Yoshi and pc5+autotune. Sorry I didn't ad more info

Besides the FI light coming on, did anything else happen ? ie breaking down or spluttering ?

MJ Williams · « **Reply #5 on:** October 23, 2014, 09:03:08 AM »

Is the bypass plug in the stock O2 sensor harness?

mcclay811 · « **Reply #6 on:** January 19, 2015, 09:19:57 AM »

No other problems at all it ran fine all summer long. And yes the o2 sensor is in

Oz Booster · « **Reply #7 on:** January 19, 2015, 02:34:06 PM »

put it in dealer mode and induce the problem

mcclay811 · « **Reply #8 on:** January 21, 2015, 02:15:18 PM »

How do I do that

Oz Booster · « **Reply #9 on:** January 21, 2015, 03:05:13 PM »

couple of capped connectors under the seat on the right side , very near the pressure sensor to the right of the battery
in the white connector there is a white wire with red stripe , you can either bridge it to ground on the frame or to the black with brown wire in the same connector
this will bring up the fault codes on the dash when they become active, there is no stored codes so you have to induce it after bridging the wires

mcclay811 · « **Reply #10 on:** February 04, 2015, 01:22:34 PM »

I got code c00

Oz Booster · « **Reply #11 on:** February 04, 2015, 01:56:03 PM »

thats says no fault ,
while its reading COO ride it to induce the problem, it will probably bring up a C37 or similar

mcclay811 · « **Reply #12 on:** February 04, 2015, 02:17:16 PM »

Ya I'm in Canada so I can't really ride until spring time lol

mcclay811 · « **Reply #13 on:** February 04, 2015, 02:18:01 PM »

Is there any other way to induce it

Oz Booster · « **Reply #14 on:** February 04, 2015, 02:59:38 PM »

Dyno maybe
Whatever replicates the condition that caused it in the first place
or wait for spring

mcclay811 · « **Reply #15 on:** February 04, 2015, 03:04:22 PM »

Ok thanks for the help

Johnnnycheese · « **Reply #16 on:** February 07, 2015, 06:31:17 PM »

Quote from: mcclay811 on February 04, 2015, 01:22:34 PM

I got code c00

Did you turn the key off before you read the code?

mcclay811 · « **Reply #17 on:** March 20, 2015, 05:51:41 PM »

Quote from: Oz Booster on February 04, 2015, 01:56:03 PM

thats says no fault ,
while its reading COO ride it to induce the problem, it will probably bring up a C37 or similar

i induce it. code "c36" comes up

BATTMAN · « **Reply #18 on:** March 21, 2015, 02:59:37 AM »

secondary injector failure

Oz Booster · « **Reply #19 on:** March 21, 2015, 04:09:24 AM »

yep no 1 secondary , check the electrical connector is on properly , it may not be seated

TT · « **Reply #20 on:** March 22, 2015, 06:42:35 PM »

Quote from: Oz Booster on January 21, 2015, 03:05:13 PM

couple of capped connectors under the seat on the right side , very near the pressure sensor to the right of the battery
in the white connector there is a white wire with red stripe , you can either bridge it to ground on the frame or to the black with brown wire in the same connector
this will bring up the fault codes on the dash when they become active, there is no stored codes so you have to induce it after bridging the wires

i installed a mini toggle switch and mounted it inside the plastic so i can just flip the switch to get codes

News:

Author Topic: Fi light comes on during fast acceleration (Read 12832 times) Tweet