Haybusa Parts and Service Member Support

Author Topic: can a pro rider turn 5.70's@131 on stockbore with these mods  (Read 12186 times)

Offline getngone

  • Rider
  • ***
  • Posts: 80
can a pro rider turn 5.70's@131 on stockbore with these mods
« on: December 12, 2002, 11:40:00 PM »
What's up fellas?I saw a pro rider run 5.74@131mph last sunday at a local track.He rides the bike for a guy that is learning to race.The bike owner swears that the only mod are extensive headwork,big cams,bde exhaust,dymags ,0-6 arm,airshifter,modded seat,pc-2,ram air scoops,arm sitting on 63inches,and pulling 1.45 to 1.50 60ft's.No dry nos.What's your thoughts and comments.Seen anything similar?      

Offline P. COOPER

  • Post Whore
  • ****
  • Posts: 978
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #1 on: December 13, 2002, 12:11:00 AM »
i would have to go out on a limb and say yes its possible on a perfect pass. did he back it up?
AMADRAGBIKE "supersport" #1992
2007 GSXR-1000ss

Offline Twisted

  • OFF TOPIC
  • Post Apocalyptic Whore
  • **********
  • Posts: 18564
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #2 on: December 13, 2002, 01:40:00 AM »
a 5.74 what? 180? what was his quarter?

Offline Busarodz

  • Mad Post Whore
  • ******
  • Posts: 4043
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #3 on: December 13, 2002, 03:52:00 AM »
Need more info so Dodobird can run his program...
"Conan, what is best in life?
To crush your enemies, see them driven before you, and to hear the lamentation of the women!"

Offline DJ

  • Post Apocalyptic Whore
  • ********
  • Posts: 12593
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #4 on: December 13, 2002, 05:22:00 AM »
i think he's talking 1/8th rodz
Do you have a kiss for Daddy?

Offline TurboBlew

  • Mad Post Whore
  • ******
  • Posts: 2014
  • Gender: Male
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #5 on: December 13, 2002, 05:41:00 AM »
Thats a HELL of a motor for not having nitrous.
Must have some major compression on a "stock bore". Definitely possible by a good rider though.
"go ahead...bring your mama!"

Offline Scotty

  • Post Whore
  • ****
  • Posts: 679
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #6 on: December 13, 2002, 08:04:00 AM »
Don;t ask me-I've never seen a bike like that go below 6 in the 1/8.

Offline SlammedStance

  • Post Whore
  • ****
  • Posts: 540
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #7 on: December 13, 2002, 08:12:00 AM »
no it cannot be done. he needs to go to a different track or fess up. 131 in the 8th not gonna happen.Cooper only weighs 100lbs  and he only goes around 131 and believe me he rides the hell out of that bike.1.45 60 fts that is not a pro rider either not at 63 inches.that bike has prob a stroker or 1429. I dont think a 1397 or 1363  not properly tuned will do that.  
AKA SlammedStance

Offline BOOSTED

  • Mad Post Whore
  • ******
  • Posts: 2895
  • Gender: Male
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #8 on: December 13, 2002, 09:24:00 AM »
Well i'm not sure, but i did a 1.44 60ft and 5.792 1/8 at 123.65Mph with 35 shots of nos and stock exhaust & stock motor did a 8.98 in that run  
Unless u r the lead dog  the view never changes

Offline len

  • Post Master
  • *****
  • Posts: 1298
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #9 on: December 13, 2002, 11:45:00 PM »
the 5.74 is possible, but at 131mph, I dont know unless he only weighs  50 lbs, I ran the no.s , and if total weight is 650lbs  (500lbs bike-150lbs  rider) and he makes 190rwhp he can run the 5.74, but to get the 131mph he needs 230 rwhp. If he is running a 5.74 with 230 rwhp , he shur aint no pro. should be 5.30's This program runs pretty well right on , if you enter the right info. Give more details, weight, ect, and I'll run it again.  
MY MOMMA TOLD ME I WAS SLOW!!! What did she mean ?

Offline Badbusa1

  • Rider
  • ***
  • Posts: 185
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #10 on: December 13, 2002, 05:33:00 PM »
The ET  is possible at a much better 60ft, however the MPH is a different story. 131 shows HORSEPOWER, and a stock engine with the best head on the planet is not even gonne be close, either the clocks are wrong or the guy is not telling you everything.  

Offline surprenant

  • Post Whore
  • ****
  • Posts: 938
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #11 on: December 13, 2002, 06:34:00 PM »
5.30'S AT ONLY     131 ON A STOCK WHEELBASE,your name better be GOD!LOLLL..

Offline surprenant

  • Post Whore
  • ****
  • Posts: 938
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #12 on: December 13, 2002, 06:42:00 PM »
DODOBIRD are refering to the MOROSO chart??i think you are talking about slick and bars??i seen KENT run 5.20 but he has a little more than 230hp and has a longer bike,5.30's is getting out of there in a hurry at only 131mph,don't you think??5.74 at 131 with a 6 over arm should be done with a 1425 and a real good one if you ask me.  

Offline getngone

  • Rider
  • ***
  • Posts: 80
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #13 on: December 14, 2002, 11:10:00 PM »
The rider that I was refering to is in the range of 195-210lbs in leathers.Very good rider and has a watercooled turbo that I've seen go 5.45@145 in the 1/8 mile.

Offline Horsepowerbygann

  • Rider
  • ***
  • Posts: 56
    • http://sc.rr.com
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #14 on: December 15, 2002, 01:27:00 AM »
I have a watercooled gsxr and i run 5.20 @ 130s with no spray.His mph is outrageous for that et.I weigh 220.

Offline Horsepowerbygann

  • Rider
  • ***
  • Posts: 56
    • http://sc.rr.com
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #15 on: December 15, 2002, 01:32:00 AM »
getgone  .Is the bike blue with gold wheels

Offline getngone

  • Rider
  • ***
  • Posts: 80
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #16 on: December 15, 2002, 01:48:00 AM »
HORSEPOWERBYGAHN,no the bike is has black aftermarket wheels and is dark red or burgundy.By the way,how big of a motor you got there that's putting down such low times.You must be one riding mofo.Ever been to Shadyside in Boiling Springs,N.C.They will be open tomorrow from 1pm-5pm.The owner stays open year round as long as the temps are 50 and above.If you're not busy tomorrow come on up and show off that awesome ZOOK POWER.Remember ,sundays 1-5.I think the track number is 704-434-7313.Later.

Offline len

  • Post Master
  • *****
  • Posts: 1298
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #17 on: December 15, 2002, 08:59:00 AM »
No not the moroso  chart, Its a program on the comp. I was assuming with the 1.45 60's he running a slick or super light, and guessing at the weight. His info dont add up,  you have to make gobs of power for that mph if you running 5.70 at 131 , because it means your not pulling on the first 100ft. you should be able to get lower ets with that kind of hp. like I said and powerbygann said, 5.20's or 30's with that kind of power, or lower mph with the 5.70's ET, and less hp ,the mph should be a lot lower. The 5.70 ET is possible on a lot less hp than the 131mph .
MY MOMMA TOLD ME I WAS SLOW!!! What did she mean ?

Offline Horsepowerbygann

  • Rider
  • ***
  • Posts: 56
    • http://sc.rr.com
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #18 on: December 15, 2002, 10:36:00 PM »
Get gone.Yes.As a matter fact the last bike race shadyside put on i won.

Offline Horsepowerbygann

  • Rider
  • ***
  • Posts: 56
    • http://sc.rr.com
can a pro rider turn 5.70's@131 on stockbore with these mods
« Reply #19 on: December 15, 2002, 10:43:00 PM »
Shawn Gann ran 5 Teens in the 140s.No Spray no bars.On a busa