TECHNICAL > ZX14/12/10 ZZR1400
Oversized Buckets Question
Ozonkiller:
I know this has been discussed but all of the threads I found were very old and didn't answer my questions exactly.
How much lift can I get away with with the stock buckets on an '06 ZX14? I'm looking at around a .405" lift.
Should I go with the 28 or 28.5mm buckets?
Who is doing the machine work and how much?
Anybody got some buckets that they want to sell?
Thanks,
Tom
krex:
Contact Jim at competitioncnc.com. I believe his limit with stock buckets was right at .400 and he mostly installs 29mm zx10 buckets. It's fairly costly and really only worth it if you use big cams.
Ozonkiller:
Thanks.
Jim replied to a post on one of the ZX14 forums and filled me in on all of the skinny.
I just need to give him a shout and find out the particulars.
Thanks again for the info.
Tom
MJ Williams:
Tom,
Looks like RC's Performance may do it. They put Hayabusa buckets in GSXR1000s. Ain't cheap.
http://www.rcsperformanceonline.com/RCs_CNC_Ported_Head_p/rcs%20gsxr%20cnc%20ported%20head.htm
Ozonkiller:
Problem solved.
I have the machinery, just wasn't sure if I had the skills. Turns out I do 8)
Tom
Navigation
[0] Message Index
[#] Next page
Go to full version