Haybusa Parts and Service Member Support

Author Topic: Tps Readings questions  (Read 4520 times)

Offline Cubano100

  • Apprentice Post Whore
  • **
  • Posts: 10
  • Enthusiast
Tps Readings questions
« on: December 31, 2014, 05:33:56 PM »
Let me begin with an apology for my ignorance. Now my Dumb issue.
Less than a year ago I bought a beautiful 2006 Busa all stock blah blah blah...
Now I got air Mod with K&N filter twoBros and PCV which is how I'm getting my TPS voltage readings. While the ignition is on but the engine is not running as I move the throttle the PCV reads every movement, but while the engine is running the position percentage it's not accurate nor is the voltage reading in my opinion. Any thoughts on this

Offline Cubano100

  • Apprentice Post Whore
  • **
  • Posts: 10
  • Enthusiast
Tps Readings questions
« Reply #1 on: January 03, 2015, 11:06:23 AM »
 


Sent from my iPhone 6+

Online RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Tps Readings questions
« Reply #2 on: January 03, 2015, 01:09:37 PM »
Double check your ground.
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline Cubano100

  • Apprentice Post Whore
  • **
  • Posts: 10
  • Enthusiast
Tps Readings questions
« Reply #3 on: January 03, 2015, 06:38:40 PM »

Double check your ground.
okay so besides the ground coming from the battery are there any other and I should check?


Sent from my iPhone 6+

Online RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Tps Readings questions
« Reply #4 on: January 05, 2015, 11:23:37 AM »
Yes, the ground to the battery that connects to the PCV.  Also, if the battery is weak it can give wonky readings.
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350