Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: front forks  (Read 5013 times)

Offline madracer3600

  • Rider
  • ***
  • Posts: 164
front forks
« on: January 16, 2015, 09:30:13 AM »
How far can I safely internally lower front forks? Turbo busa 2inch oil pan. Everything else on the front end is stock.
Logged

Offline madracer3600

  • Rider
  • ***
  • Posts: 164
Re: front forks
« Reply #1 on: January 22, 2015, 07:37:42 PM »
what has happened to this forum? No free advice :bah: I'm guessing 2 to 2.5 inches
« Last Edit: January 22, 2015, 07:39:28 PM by madracer3600 »
Logged

Offline Stainless1

  • Rider
  • ***
  • Posts: 419
  • Gender: Male
Re: front forks
« Reply #2 on: January 22, 2015, 11:23:44 PM »
http://www.suzukihayabusa.org/forum/index.php?topic=163733.0;topicseen
or use the search function, it has been discussed quite a bit. 
Logged
Bonneville 200 MPH Club
245 MPH Turbo Busa Powered Lakester
208.959 MPH NA GSXR 1000

Offline fvance

  • Legacy Rider
  • Mad Post Whore
  • *
  • Posts: 2881
  • Gender: Male
    • Vance and Forstall Racing
Re: front forks
« Reply #3 on: January 23, 2015, 12:42:07 PM »
mackintosh lowered one set of mine 3in. No problems!
Logged
WORLDS FASTEST PRODUCTION MOTORCYCLE
VANCE & FORSTALL RACING
Top Speed 235 mph
HP by Carpenter & Johnny Cheese  Engine by Knecum
SponsersCATALYST COMPOSITES,JOHNNY CHEESE,KNECUM RACING ENGINES,MURRAY EXHAUST,CARPENTER RACING

Offline madracer3600

  • Rider
  • ***
  • Posts: 164
Re: front forks
« Reply #4 on: January 23, 2015, 11:10:19 PM »
Quote from: fvance on January 23, 2015, 12:42:07 PM
mackintosh lowered one set of mine 3in. No problems!
What is used for drag racing use only, land speed, or a little street? Thanks for the reply. I searched the topic there was a lot of talk about lowering the front forks. But nothing about the results. I just don't want to be a statistic and end up sliding across the ground. Again THANKS!
Logged

Offline madracer3600

  • Rider
  • ***
  • Posts: 164
Re: front forks
« Reply #5 on: February 01, 2015, 02:56:55 PM »
I did mine today at 3inches I will post how they do at the race track when I get them reinstalled and take the bike to the track. :bike:
Logged
Pages: [1]   Go Up
« previous next »