Haybusa Parts and Service Member Support

Author Topic: Oil cooled gsxr build  (Read 8676 times)

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Oil cooled gsxr build
« on: February 03, 2015, 02:28:56 PM »
Hi all, here some pictures of my build, sorry for quality, i use my phone to take pictures, sorry for bad english too... I start with MTC big block, old sleeves going to trash bin, i make new sleeves, and block been bored. 

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #1 on: February 03, 2015, 02:30:44 PM »


Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #2 on: February 03, 2015, 02:34:40 PM »
MTC pistons, lightened, and circlip grooves added.


Cutting large pockets, for a bigger valves.

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #3 on: February 03, 2015, 02:42:15 PM »
I make new bigger seats, to suit APE stainless valves.

Seats installed, i replace guides too, (APE bronze guides)



Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #4 on: February 03, 2015, 02:46:52 PM »


I make titanium retainers

New camchain, and APE valve springs.

« Last Edit: February 09, 2015, 11:10:37 AM by slavatokar »

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #5 on: February 03, 2015, 02:48:05 PM »
Overhauled oil pump

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #6 on: February 03, 2015, 02:57:29 PM »
I found crankcase bearing holes egg-shaped, and need to be align bored.

Both halves been milled, bolted together with APE studs, and align bored to all holes, main bearing and transmission bearing holes.


Crankshaft balanced, polished, Carrillo rods fitted.

Offline canadian john

  • Rider
  • ***
  • Posts: 225
  • Gender: Male
  • Where am I?
Re: Oil cooled gsxr build
« Reply #7 on: February 03, 2015, 07:13:15 PM »
Nice Job   :thumb:

Offline MJ Williams

  • Rider
  • ***
  • Posts: 453
  • Gender: Male
Re: Oil cooled gsxr build
« Reply #8 on: February 03, 2015, 11:03:36 PM »
Your English may not be so good but your machine work looks first class!
Let us know how it runs.  :thumb:
Have a Harley, spent lots of money on it, thought I had a fast motorcycle, bought a Busa, realized all I had was a fast Harley, not a fast motorcycle!

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #9 on: February 04, 2015, 11:37:09 AM »
Thank you!
Complete engine.

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #10 on: February 04, 2015, 11:50:11 AM »
Setrab oil cooler.


Offline HOS

  • OFF TOPIC
  • Post Apocalyptic Whore
  • **********
  • Posts: 12269
  • Gender: Male
Re: Oil cooled gsxr build
« Reply #11 on: February 06, 2015, 05:26:37 AM »
Thank you!
Complete engine.


Looks great, some nice work elsewhere on the bike too.
Is a street bike or race bike?

What is the power output?
I have no more sh*ts to give.

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #12 on: February 06, 2015, 01:54:57 PM »
Thank you!
Complete engine.


Looks great, some nice work elsewhere on the bike too.
Is a street bike or race bike?

What is the power output?
This is a street bike, unfortunately i don't have dyno anywhere in my town...

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #13 on: February 06, 2015, 02:10:42 PM »
Aprilia RSV1000 fork, russian made forged wheels, ducati brake calipers and strange brake discs with central parts made of carbon fibre material. Titanium spindle, bolts and nuts

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #14 on: February 06, 2015, 02:19:11 PM »
Swingarm been braced using upper part taken from R1 swingarm, not best welds in the world, but cost me nothing.


Offline HOS

  • OFF TOPIC
  • Post Apocalyptic Whore
  • **********
  • Posts: 12269
  • Gender: Male
Re: Oil cooled gsxr build
« Reply #15 on: February 06, 2015, 02:44:40 PM »
Seeing your thread for the first time reminded me of this bike built a guy named Lee in UK.
I've seen the bike for myself it was at quite a few bike shows.

http://www.ukleenet.webspace.virginmedia.com/
I have no more sh*ts to give.

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #16 on: February 07, 2015, 04:14:30 AM »
Seeing your thread for the first time reminded me of this bike built a guy named Lee in UK.
I've seen the bike for myself it was at quite a few bike shows.

http://www.ukleenet.webspace.virginmedia.com/
Yes, i seen Lee proect before, perfect bike, i just don't have enough money to build such good bike as Lee did, i am just lathe operator, money is a big problem.

Offline HOS

  • OFF TOPIC
  • Post Apocalyptic Whore
  • **********
  • Posts: 12269
  • Gender: Male
Re: Oil cooled gsxr build
« Reply #17 on: February 07, 2015, 09:14:41 AM »
Seeing your thread for the first time reminded me of this bike built a guy named Lee in UK.
I've seen the bike for myself it was at quite a few bike shows.

http://www.ukleenet.webspace.virginmedia.com/
Yes, i seen Lee proect before, perfect bike, i just don't have enough money to build such good bike as Lee did, i am just lathe operator, money is a big problem.

Everyone in the UK who's seen Lee's bike woud like to have the money too  :wink:  :D

Please carry on showing your great work?
I have no more sh*ts to give.

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #18 on: February 07, 2015, 11:11:43 AM »
Rear brake disc, heat treated stainless steel:




Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #19 on: February 07, 2015, 11:17:04 AM »
Titanium sidestand:

Offline HOS

  • OFF TOPIC
  • Post Apocalyptic Whore
  • **********
  • Posts: 12269
  • Gender: Male
Re: Oil cooled gsxr build
« Reply #20 on: February 07, 2015, 12:17:56 PM »
What is money worth when you have engineering and fabrication skills like yours !
Fair play to you slavatokar  :thumb:
I have no more sh*ts to give.

Offline Superzuki 2012

  • Rider
  • ***
  • Posts: 54
  • Gender: Male
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #21 on: February 08, 2015, 09:36:52 PM »
Wow! That's nice.
I've always liked the looks of those oil/air engines.
OBJECTS IN MIRROR ARE
NO LONGER IMPORTANT

Offline FlatlandBusa

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 2603
  • Gender: Male
  • -John- Middleofnowhere, Nebraska
Re: Oil cooled gsxr build
« Reply #22 on: February 08, 2015, 10:31:41 PM »
 :thumb: :thumb:  Very nice!!!
"You can not escape the responsibility of tomorrow by evading it today."
-Abraham Lincoln

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #23 on: February 09, 2015, 11:27:57 AM »
Thank all!
Building titanium exhaust system, start with smashed headers:





Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #24 on: February 16, 2015, 09:20:04 AM »

Offline FlatlandBusa

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 2603
  • Gender: Male
  • -John- Middleofnowhere, Nebraska
Re: Oil cooled gsxr build
« Reply #25 on: February 16, 2015, 11:04:11 PM »
Very nice!!!  :thumb: :thumb:
"You can not escape the responsibility of tomorrow by evading it today."
-Abraham Lincoln

Offline GSXRTURBO1

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1806
Re: Oil cooled gsxr build
« Reply #26 on: April 17, 2015, 01:50:33 PM »
looks really good....well done!
Thomas

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #27 on: April 18, 2015, 02:41:30 PM »
looks really good....well done!
Thank you!

Offline gsx-rboy750

  • Authorized Shop
  • Post Master
  • **
  • Posts: 1705
  • Ok. So sometime I can be a little full of myself.
Re: Oil cooled gsxr build
« Reply #28 on: September 15, 2015, 06:27:59 PM »
Dam!!! My goal someday is a turbo carbi oil cooled 750. If i dont commit sucide trying to get the tune right.
That incredible work.

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #29 on: December 24, 2016, 02:33:40 PM »
Bike still run good) DSC01360 by Вячеслав Филатов, on Flickr

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #30 on: December 24, 2016, 02:35:04 PM »

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #31 on: September 10, 2017, 01:15:04 PM »
)

Offline hotwaves

  • Apprentice Post Whore
  • **
  • Posts: 7
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #32 on: October 30, 2017, 02:37:35 PM »
It's a beauty!

Offline HOS

  • OFF TOPIC
  • Post Apocalyptic Whore
  • **********
  • Posts: 12269
  • Gender: Male
Re: Oil cooled gsxr build
« Reply #33 on: November 05, 2017, 04:56:01 AM »
Any news on the bike slavatokar??
I have no more sh*ts to give.

Offline slavatokar

  • Rider
  • ***
  • Posts: 22
  • Enthusiast
Re: Oil cooled gsxr build
« Reply #34 on: November 10, 2017, 02:22:11 PM »
Hello, bike working fine, just  repaint and seat repair needed. Dont have enough money to make this happen unfortunetly(