TECHNICAL > GEN II BUSA
Best places for ECU remapping a GEN2
(1/1)
leftluggy:
Hi all,
I am new to the hayabusa ownership, having just purchased a white 2008 Gen2 with 15,000 miles on the clock.
It isnt running well when ridden gently, with no visible modifications, it stutters as if running out of fuel/ electrical fault.
Anyway, i suspected that it was running rich as it stunk of unburnt fuel with stock silencers fitted.
I swapped out the standard cans for straight through delkevic cans and it is popping and backfiring on decelleration which confirms my thoughts of it being overfuelling.
I was wondering if anyone could recommend the best places with experience of rolling road remapping the Gen2, as i think this is my best option, and hopefully get the timing retards and top speed restiction removed at the same time.
I live in darlington, north east uk, but dont mind travelling to get the word done by the right person.
Can anyone recommend anywhere please?
thanks in advance
Red:
Before you go changing the tune ~ make sure that your filters are clean . . .
pamark:
BSD Performance near Peterborough - highly recommended !!!!
wildphil69:
I would say you have something else wrong. Generally slip ones won’t make your bike run bad
Oz Booster:
Yep if down on power check the pump and internal filters (not just the tea bag strainer on the pickup ),I expect its lean . not often they will go rich unless something like hose kinked or ambient air pressure sensor fault and I am yet to see that on a gen 2
Navigation
[0] Message Index
Go to full version