Crank

[6 inch over]

Looking to buy a crank . What's the turnaround on a new weld up?

[6 inch over]

Gen 1 busa, 5 mil

[knecum]

If your wanting your own crank done, it would take 3 -4 months.   Or you can buy one from someone but then you wouldn't know the history of the crank your getting. Could've  had 4 spun bearings. I never use bad cranks for weld ups. I won't even build one if someone  brought it to me and told me it was from a damaged crank.  Do what you want though.

[RansomT]

APE has Billet ones with no core charge for $1949

[6 inch over]

Thanks, I hope my spare is good

[6 inch over]

APE has Billet ones with no core charge for $1949

I didn't know that. I guess I need to call them back
And ask more ????.

[speedduck]

That is a great deal, few years ago i paid much more for 5mm billet, and it was not as good as this one,

http://www.hayabusazone.com/crankshafts.html

[6 inch over]

I'm calling tomorrow, I wish they would have 1 on the shelf.

[Rocketgeezer]

Have not done a bike motor with a good crank, but on my blown dragster motors if your running hard (and who don't) there is no substute for a billet crank, at any price