Haybusa Parts and Service Member Support

Author Topic: Been a while .. new power / have questions  (Read 6694 times)

Offline upgradedbusa

  • New User!
  • *
  • Posts: 4
  • Enthusiast
Been a while .. new power / have questions
« on: November 09, 2016, 08:12:53 PM »
Good day.

As a Few may remember I put a turbo on my bike. Made 230, then added a spacer plate, studs, cam gear, made 291. Been making passes on stock wheel base and on 275 wheel did a 9.1@160.  Stock tire, manual shifting, stock clutch. Strapped. Pc5.

Fast forward, broke intake guide and took engine out, and back in. Decided to add a proper stand alone. And, since I run a MoTeC in my Supra I bought one for the bike. (Although a different model) M130, with a C125 and keypad. Been testing anti wheelie programmed by Cody phillips racing too.  Boost per gear , traction control , etc.. so much to list while typing on my phone. Lol

Question.. what's everyone running on stock wheel base?
and what power?
I just dynoed low boost 352 and plan to add more to use for the shift sector 1/2 mile next year. Anyone here go to shift sector?

Yes, stock engine with this power but I'm building it over the winter. It's already out.  I wanted to push it a lil to see what we could get out of it without breaking it.
Low comp engine , cams... id 725, Weldon reg.. fuel rail..

Thanks in advance.


Guess my other account got  deleted.! Dammit

Online ADMIN

  • Administrator
  • Post Master
  • *****
  • Posts: 1572
Re: Been a while .. new power / have questions
« Reply #1 on: November 09, 2016, 09:46:46 PM »
Assistance is available. Any info you can provide will help us locate your other account.
Closed course. Professional rider. Do not attempt.

Still privately owned and operated by Hayabusa owner enthusiasts. 2002, small  a/a kit, CF body

If it's in a truck or trailer, it's being stolen

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Been a while .. new power / have questions
« Reply #2 on: November 10, 2016, 05:34:19 PM »
Every time I check shift sector 1/2 mile events were car only.  :cry:
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline upgradedbusa

  • New User!
  • *
  • Posts: 4
  • Enthusiast
Re: Been a while .. new power / have questions
« Reply #3 on: November 11, 2016, 01:04:38 PM »
They did bikes this past year. 👌

Offline upgradedbusa

  • New User!
  • *
  • Posts: 4
  • Enthusiast
Re: Been a while .. new power / have questions
« Reply #4 on: November 11, 2016, 09:21:37 PM »
They did bikes this past year. 👌

Not many people seem to answer questions here.

How much power is needed to crack 200 in 1/2. .?

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Been a while .. new power / have questions
« Reply #5 on: November 12, 2016, 07:16:57 AM »
There is a lot of variables just to throw out a firm number.  Aero, weather, rider, tires, suspension .. all come into play.

I've never ran 1/2 mile with the correct gearing just for the 1/2.  I have always ran my taller 1.0 mile gearing, so I am sure my 1/2 mile speeds are slower than they could be.

With that said, if the conditions are good and run is good; I would say 300 should get you there. However, I've seen 450+ HP bikes show up at a 1.0 event with a rookie driver and not make it over 200 mph.

Sometimes less is more.
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline SEJ

  • OFF TOPIC
  • Rider
  • **********
  • Posts: 398
Re: Been a while .. new power / have questions
« Reply #6 on: November 14, 2016, 09:13:20 AM »
I've gone 201.5 in the half mile with less than 300 HP.
I was actually geared too low and would've liked to have dropped one tooth in the rear, but it was so damn hot that day that I couldn't muster up the energy to do it. My goal was 200, and I accomplished it.
222.66 MPH at the Ohio Mile
201.52 MPH in the 1/2 Mile
12 lbs. boost
01' Turbo GSX-R 1000

Offline GBusa357

  • Rider
  • ***
  • Posts: 260
Re: Been a while .. new power / have questions
« Reply #7 on: November 19, 2016, 04:06:40 AM »
what gearing ru running?

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7352
  • Gender: Male
Re: Been a while .. new power / have questions
« Reply #8 on: November 19, 2016, 07:23:17 AM »
1/2 mile to get to 200 is about 1400 ft too much  8)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline piratediverjefff

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 8540
  • Gender: Male
Re: Been a while .. new power / have questions
« Reply #9 on: November 19, 2016, 02:28:40 PM »
 :lol:
Build a man a fire and he'll be warm for a day,light a man on fire and he'll be warm for the rest of his life.

Offline SEJ

  • OFF TOPIC
  • Rider
  • **********
  • Posts: 398
Re: Been a while .. new power / have questions
« Reply #10 on: November 23, 2016, 08:28:22 AM »
what gearing ru running?


It was either 17/37 or 17/38 with a 190/55 Power One on a 2001 GSXR 1000

It was a couple of years ago...I'm old and don't remember which of the two gearing combinations I used.

I was nowhere close to 300 HP...but 250+
222.66 MPH at the Ohio Mile
201.52 MPH in the 1/2 Mile
12 lbs. boost
01' Turbo GSX-R 1000