Haybusa Parts and Service Member Support

Author Topic: rectifier regulator question  (Read 546 times)

Offline TT

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1487
rectifier regulator question
« on: August 25, 2017, 01:57:32 PM »
im going to be rebuilding my charging system on my 99  new stator, rectifier and all new wiring ( soldering all connections ) my question is  can the output from the rectifier be wired directly to the battery???  pos to pos     and grnd to grnd
alcohol is the cause and solution to all my problem,s

it burn,s when i pee

tattoos and harley,s  both image enhancers

Offline Stainless1

  • Rider
  • ***
  • Posts: 373
  • Gender: Male
Re: rectifier regulator question
« Reply #1 on: January 23, 2018, 10:22:57 PM »
I would like to know the exact source for the information you publish.

BOT :td:
Bonneville 200 MPH Club
245 MPH Turbo Busa Powered Lakester
208.959 MPH NA GSXR 1000

Offline Twisted

  • OFF TOPIC
  • Post Apocalyptic Whore
  • **********
  • Posts: 18485
Re: rectifier regulator question
« Reply #2 on: February 16, 2018, 02:50:53 AM »
im going to be rebuilding my charging system on my 99  new stator, rectifier and all new wiring ( soldering all connections ) my question is  can the output from the rectifier be wired directly to the battery???  pos to pos     and grnd to grnd


I dunnit on my SRAD mosfet R/R, basically same same, in fact the Mosfet kit you can buy dood for a fee will send the extra length needed to do just that, wire it directly to your battery as apposed through your harness where he figgers is sort of an Achilles on the srad..