Haybusa Parts and Service Member Support

Author Topic: Remove Crank Trigger  (Read 116 times)

Offline rick_b

  • Apprentice Post Whore
  • **
  • Posts: 14
Remove Crank Trigger
« on: September 06, 2017, 10:02:24 PM »
I want to do away with the alternator housing, so I can fit a starter nut. What is the best thing to do with the crank trigger?

Online sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7220
  • Gender: Male
Re: Remove Crank Trigger
« Reply #1 on: September 07, 2017, 04:49:51 AM »
Most use a rt side trigger for  ignition pickup on a dyna or arc, or firestorm ignition. Fast By Gast have a billet cover for the rt side with a pickup mounted in it. We might have a used one at the shop.

You will still have to use a cover with a seal for the cases on the left side. APE make a left side exrernal starter cover setup.
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.51, 171.75mph 1/8th mile  6.908, 212.83mph 1/4 mile Tuning

Offline rick_b

  • Apprentice Post Whore
  • **
  • Posts: 14
Re: Remove Crank Trigger
« Reply #2 on: September 08, 2017, 03:37:36 PM »
Most use a rt side trigger for  ignition pickup on a dyna or arc, or firestorm ignition. Fast By Gast have a billet cover for the rt side with a pickup mounted in it. We might have a used one at the shop.

You will still have to use a cover with a seal for the cases on the left side. APE make a left side exrernal starter cover setup.

Thanks I will look in to that. I knew about the seal, the new engine plate has one in it.

Offline rick_b

  • Apprentice Post Whore
  • **
  • Posts: 14
Re: Remove Crank Trigger
« Reply #3 on: September 17, 2017, 03:13:42 PM »
sportbikeryder, Did ever check to see if you had that used Fast By Gast have a billet cover?

Rick