Haybusa Parts and Service Member Support

Author Topic: Fitting high bars  (Read 344 times)

Offline mark14

  • New User!
  • *
  • Posts: 1
  • Enthusiast
Fitting high bars
« on: January 28, 2018, 08:50:21 AM »
Hi all, I have had to re register as I lost all my details and old e-mail address. UK here.

I have had my 2011 busa for 3 years now but due to a slipped disc in my back I need to fit higher bars. I have fitted a genmar riser and helibars but it is nowhere near enough and the cables are now at their maximum reach.

I don't have the space to take everything apart and fit it all myself so the plan is to get all the parts and then have them fitted..... Sounds easy doesn't it.

I have got some renthal bars, no problem there.
I can't find anywhere to get an extended front brake Hydraulic hose unless I send the original cable to them, so I brought a Hell replacement which I was going to send but the banjos don't look as wide as the originals....... can you help  eg   measurements or where I can get some extended cables.  I don't want to get one from Suzuki as they have quoted 70 for the long hose.

I'm having the same problem with the clutch hose, Suzuki wants ( you had better sit down for this) over 200 for the clutch hose....I got one for 35 but again the banjo does not look as wide as the original.

I thought it would be a fairly straightforward job....lol
I hope someone out there can help
many thanks
Mark
« Last Edit: January 28, 2018, 08:52:46 AM by mark14 »

Online Sport

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1822
  • Gender: Male
Re: Fitting high bars
« Reply #1 on: January 28, 2018, 11:47:43 AM »
Galfer and probably others, will make brake lines to whatever length you want.
Ride em if ya got em

Offline Vanishing Point

  • Rider
  • ***
  • Posts: 81
  • Gender: Male
  • My Own Busa as a Cursor on TomTom
    • HayaBusaClubHolland
Re: Fitting high bars
« Reply #2 on: January 31, 2018, 05:34:29 PM »
Hello from Tulpcountry Mark , are you on HR UK Facebook page /

i ride with ABM Superbikekit , and going years ago near a local bike shop and ask : do you have Goodridge on the roll.
Yes they have it and we cut 2 x 10cm longer lines for clutch and front brake.
Also pick up the banjo's with right angles , real bike shops have all type angle banjos in a box .
ALL PARTS FROM GOODRIDGE.

You can also google on : Spiegler clutch and brake lines for superbikekits.

ABM/LSL and Spiegler made all sbkits in same factory , it's you a nice decal on top .

See my settup and you can find me on HRUK/I-SHOC/H Scotland Facebook .
See my Avitar on all fb pages.
« Last Edit: January 31, 2018, 05:52:04 PM by Vanishing Point »
Busa'00 Bleu/Silver,Front Drop 2"and Rear 3"
I like Dragracing from 1976
Busa is FUN,FunnyBike is a Hayabusa