Haybusa Parts and Service Member Support

Author Topic: Removing Butterflys  (Read 4969 times)

Offline proutyc

  • Rider
  • ***
  • Posts: 173
  • Gender: Male
  • hayabusa powered Kitcar
Removing Butterflys
« on: March 12, 2018, 04:42:33 PM »
Sorry just looking for some guidance on how to remove the standard throttle blades so I can fit Stainless ones on my turbo engine?

Thanks
Chris

Offline wildphil69

  • Post Master
  • *****
  • Posts: 1978
  • Gender: Male
Re: Removing Butterflys
« Reply #1 on: March 13, 2018, 06:26:07 AM »
Why do you want to change them?
Nitrous is like a hot chick with STD'S...You know you wanna hit it but your just not sure of the consequences.

Offline Gary Evans

  • Rider
  • ***
  • Posts: 157
    • AzBikeTech
Re: Removing Butterflys
« Reply #2 on: March 13, 2018, 07:21:01 AM »
If they are staked on the back side you should grind it flat then use a good fitting sharp screw driver.

Offline proutyc

  • Rider
  • ***
  • Posts: 173
  • Gender: Male
  • hayabusa powered Kitcar
Re: Removing Butterflys
« Reply #3 on: March 13, 2018, 02:52:27 PM »
Thanks for the responses

I'm changing them as I have a bent blade on my turbo

Offline Gary Evans

  • Rider
  • ***
  • Posts: 157
    • AzBikeTech
Re: Removing Butterflys
« Reply #4 on: March 13, 2018, 02:56:00 PM »
I've done that but no one sold replacements at the time. That was a fun machining job.