Haybusa Parts and Service Member Support

Author Topic: 08 Has Check Light and Temp Gauge Maxed Out- Runs Fine Though  (Read 3261 times)

Offline krex

  • Rider
  • ***
  • Posts: 61
I changed oil in a friend's 08 bus and the check light stays lit while the bike is running and the temp gauge pegs out immediately. I've googled the issue and see that it's a known issue but really don't see a fix. I jumpered out the sidestand switch and same deal. Any clues? I have no idea that this problem didn't exist before I touched it. Bike runs fine.

Offline wildphil69

  • Post Master
  • *****
  • Posts: 1978
  • Gender: Male
Re: 08 Has Check Light and Temp Gauge Maxed Out- Runs Fine Though
« Reply #1 on: March 22, 2018, 06:58:45 AM »
Check the temp switch
Nitrous is like a hot chick with STD'S...You know you wanna hit it but your just not sure of the consequences.

Offline krex

  • Rider
  • ***
  • Posts: 61
Re: 08 Has Check Light and Temp Gauge Maxed Out- Runs Fine Though
« Reply #2 on: March 23, 2018, 03:29:44 PM »
Temp switch checked good. Now entire cluster quit indicating. Looking like the cluster is kaput. Will investigate.

Offline STUNNAH

  • Post Master
  • *****
  • Posts: 1582
  • Gender: Male
Re: 08 Has Check Light and Temp Gauge Maxed Out- Runs Fine Though
« Reply #3 on: April 01, 2018, 03:28:50 AM »
Maybe a fuse or loose  connection, that oil light would worry me...
Getting "Blown" is a hell-of-a drug...STUNNAH...

Offline wildphil69

  • Post Master
  • *****
  • Posts: 1978
  • Gender: Male
Re: 08 Has Check Light and Temp Gauge Maxed Out- Runs Fine Though
« Reply #4 on: April 17, 2018, 06:27:49 AM »
It’s a low oil pressure light checking level really won’t tell you anything
Nitrous is like a hot chick with STD'S...You know you wanna hit it but your just not sure of the consequences.