Haybusa Parts and Service Member Support

Author Topic: Squish  (Read 6081 times)

Offline vinny e

  • Apprentice Post Whore
  • **
  • Posts: 7
Squish
« on: April 23, 2018, 11:33:00 AM »
Building 1441 and one of my piston squish mesurement comes out @ .039.  (Used 2 pieces of solder and averaged them ). Would this be to tight??? 

Offline B.Eskedal

  • Apprentice Post Whore
  • **
  • Posts: 19
  • Gender: Male
Re: Squish
« Reply #1 on: April 23, 2018, 01:42:20 PM »
No
I use 0.8mm (032) on my 1441 with stock rods.

Offline vinny e

  • Apprentice Post Whore
  • **
  • Posts: 7
Re: Squish
« Reply #2 on: April 23, 2018, 05:17:56 PM »
Thank you I’m a tad paraanoid

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Squish
« Reply #3 on: April 23, 2018, 06:12:07 PM »
But the better question would be what is your PTV clearance?
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline vinny e

  • Apprentice Post Whore
  • **
  • Posts: 7
Re: Squish
« Reply #4 on: April 24, 2018, 09:23:51 AM »
Thanx for the heads up,  next measurement,  built it last time tight but had issues (wasn’t nice on street). Only race once or twice a year so trying to make it nicer for street..  found out what all race motor ment! 

Offline MJ Williams

  • Post Whore
  • ****
  • Posts: 541
  • Gender: Male
Re: Squish
« Reply #5 on: April 24, 2018, 10:45:21 AM »
I use 0.8mm (032) on my 1441 with stock rods.

What kind of rpm are you turning with .8mm?
Have a Harley, spent lots of money on it, thought I had a fast motorcycle, bought a Busa, realized all I had was a fast Harley, not a fast motorcycle!

Offline B.Eskedal

  • Apprentice Post Whore
  • **
  • Posts: 19
  • Gender: Male
Re: Squish
« Reply #6 on: April 26, 2018, 02:07:48 AM »
I have my rev limiter at 12000rpm.

Offline MJ Williams

  • Post Whore
  • ****
  • Posts: 541
  • Gender: Male
Re: Squish
« Reply #7 on: April 26, 2018, 11:32:14 AM »
 :tu: :tu:
Have a Harley, spent lots of money on it, thought I had a fast motorcycle, bought a Busa, realized all I had was a fast Harley, not a fast motorcycle!

Offline speedduck

  • Post Whore
  • ****
  • Posts: 697
Re: Squish
« Reply #8 on: April 26, 2018, 11:37:56 AM »
One time i used 0.7mm with stock rods, i had Wiseco pistons, part number printed on top of piston,
when taking the engine apart later, i could read the number from the head, backwards