Haybusa Parts and Service Member Support

Author Topic: Hayabusa gen 1 swop to Gen 2 Info needed  (Read 3158 times)

Offline Swiftfalcon

  • New User!
  • *
  • Posts: 1
  • Gender: Male
  • BURN RUBBER NOT YOUR SOLE
Hayabusa gen 1 swop to Gen 2 Info needed
« on: July 22, 2018, 11:24:47 AM »
 :FIREdevil:

Good day Guys,

I had bought a 2005 Hayabusa from a friend and he was busy building it to Go Gen 2. So i have a few questions that most of you already did or still thinking off.
1. Gen 2 Throttelbody, will it fit gen 1 head or must I change the head and Throttelbody of gen 1 to gen 2 fully.
2.. If the Change is done from gen 1 to gen 2 on Throttel bodies, i must change the whole harness.
3. Shocks looks the same but the gen 2 front bottom is not the same, the fender does not fit at all. So there is a must change .
4. Radiator change and oil cooler must be change or not. \
5. Reservoir is on te left, can i leave it there or must i change to Gen 2 Right side Reservoir.
6. Then the Gen 1 tank fits yes, but i want the Gen 2 tank on, looks better for me
7. Airbox must i change it or will it fit when i change the tanks from gen 1 to 2

ps. I have already the gen 2 rolling chassis and sub frame.

i have stock gen 1 motor at this stage.

I new to all of this rebuilds, any info will helpfull
thanks in advance to all
Burn rubber not youR sole... BUSA 4 LIFE