Haybusa Parts and Service Member Support

Author Topic: Clutch Springs  (Read 4378 times)

Offline firefighter82

  • Rider
  • ***
  • Posts: 40
Clutch Springs
« on: September 05, 2018, 09:43:38 AM »
Anyone know if you can use any other bike clutch springs in a 2000 1300 Busa multistage that are a little softer than the MTC soft springs????

Offline firefighter82

  • Rider
  • ***
  • Posts: 40
Re: Clutch Springs
« Reply #1 on: November 14, 2018, 09:01:19 PM »
Using a gen 1 multi stage with mtc soft springs. Can’t get clutch to slip even with no shim. Bike 63” wheel base. Need to get bike to slip out the gate. Best 60’ is 1.53.

Offline KZScott

  • Post Whore
  • ****
  • Posts: 684
  • Gender: Male
Re: Clutch Springs
« Reply #2 on: November 16, 2018, 06:33:17 PM »
run 4 instead of 6
01 ZX-12R 8.84 @ 156.3 on dot tires, pump gas, NO power adders.... turbo 8.47 @ 164
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot... turbo 8.32 @ 173
00 ZX-12R  1: 222.046 1.5: 226.390 Loring AFB Worlds Fastest NA Kawasaki
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1  1.5: 266.5 Loring AFB Worlds fastest ZX-12R
Fabricator/Engine builder @ RCC Turbos