Haybusa Parts and Service Member Support

Author Topic: 10" Slick on a stock frame??  (Read 10048 times)

Offline Stubbs

  • Post Whore
  • ****
  • Posts: 763
  • Gender: Male
  • 265+mph Club
Re: 10" Slick on a stock frame??
« Reply #50 on: April 25, 2009, 11:02:23 AM »
 :thumb: :thumb:

That is SWEET!!
265 mph Naked Loring (World record)
262 mph Naked #ecta (TR)
253.4 mph Naked Texas mile
230.5mph Naked Half Mile Colorado (WR)
248 naked Colorado Mile (TR)/TredwayStubbs Racing
248 naked ECTA~Ohio (TR) / TredwayStubbs Racing
264 ECTA~Maxton SGR
259.9 Texas Mile SGR & Mr Turbo
265 LTA Loring 09 SGR

Offline R/T

  • Rider
  • ***
  • Posts: 109
  • Where am I?
Re: 10" Slick on a stock frame??
« Reply #51 on: April 26, 2009, 10:43:17 AM »
We went to track for 1st test session yesterday. Air temp was low 50's ,track temp at the line was only 63. Had 2 rain delay's .Not much track prep, was good to the 330' ,not so good past that. It would start spinning the 10" from 330' on. Riding a spinning 10" is alot more work than a 7" slick. It wants to shake side to side. We also had a strong head/cross wind that would push me from the right lane to the left at the traps. We have our 1st NWDB race 5/3/09 hope for better conditions then. I want to say thanks again to Kerry Drost AKA Buzzard, for all his tuning help and hard work :thumb:

Best NA pass 220 hp

60' 1.320
330' 3.545
1/8 5.462
MPH 126.83
1,000' 7.163
1/4 8.633
MPH 152.20

Best Nitrous pass 1 stage 320 hp. I have run 7.80 on a 7" slick with suspension on a good track at this hp level.

60' 1.329
330' 3.493
1/8 5.266
MPH138.84
1'000' 6.810
1/4 8.145
MPH 167.16





Offline DENNIS8269

  • Post Master
  • *****
  • Posts: 1336
Re: 10" Slick on a stock frame??
« Reply #52 on: April 26, 2009, 11:24:54 AM »
Good job Uncle. That is a great photo as well. Pucker Power ;) That bike is a work of art as is evrything you build.
01 Hayabusa 
06 GSXR 1K  Building for a trackbike
97 Harley Badboy - For Cruising


Offline R/T

  • Rider
  • ***
  • Posts: 109
  • Where am I?
Re: 10" Slick on a stock frame??
« Reply #53 on: April 26, 2009, 11:31:05 AM »
Good job Uncle. That is a great photo as well. Pucker Power ;) That bike is a work of art as is evrything you build.

Thanks Kid :D

Offline Smokin Ya

  • Post Whore
  • ****
  • Posts: 508
Re: 10" Slick on a stock frame??
« Reply #54 on: April 26, 2009, 12:49:14 PM »
That is a great photo.  Best of luck on the 3rd.  Keep us updated :thumb:

Offline R/T

  • Rider
  • ***
  • Posts: 109
  • Where am I?
Re: 10" Slick on a stock frame??
« Reply #55 on: April 26, 2009, 01:26:15 PM »
The photo was taken by George at www.nwdragracing.com . He is the photographer at Woodburn Dragstrip in Woodburn Oregon.

Offline cstraubs1

  • Mad Post Whore
  • ******
  • Posts: 3540
Re: 10" Slick on a stock frame??
« Reply #56 on: April 26, 2009, 02:52:42 PM »
That pic has my vote for the Next Front page picture!!!  Too sweet!!!


Nice MPH there too... :thumb:

Offline R/T

  • Rider
  • ***
  • Posts: 109
  • Where am I?
Re: 10" Slick on a stock frame??
« Reply #57 on: April 26, 2009, 03:49:43 PM »
That pic has my vote for the Next Front page picture!!!  Too sweet!!!


Nice MPH there too... :thumb:
With good traction at 320 hp it should run 145-150 at the 1/8th and 175-180 at the 1/4.

Offline Mike-Nightrider

  • Mad Post Whore
  • ******
  • Posts: 4317
  • Gender: Male
Re: 10" Slick on a stock frame??
« Reply #58 on: April 27, 2009, 12:34:13 AM »
Good job  :woot:
Dragraceteam NIGHTRIDER
1/8: 5.101s..........1/4: 7.801s
227.7mph Woodbridge/GB 2013

Offline RAWPOWER

  • Rider
  • ***
  • Posts: 380
  • Gender: Male
Re: 10" Slick on a stock frame??
« Reply #59 on: April 27, 2009, 07:55:49 AM »
SWEET looking bike, good job!    :thumb:

Offline lee8sec

  • Rider
  • ***
  • Posts: 114
  • Gender: Male
Re: 10" Slick on a stock frame??
« Reply #60 on: June 23, 2019, 05:12:20 AM »
Any more updates or info on how the bike went? Yes, I known its a old post.
We are the people that our parents warned us about.