Haybusa Parts and Service Member Support

Author Topic: Carbon Fiber bodywork......  (Read 1224 times)

Offline Ali123

  • Rider
  • ***
  • Posts: 187
  • Enthusiast
Carbon Fiber bodywork......
« on: January 12, 2020, 09:01:26 AM »
anyone here with some good lookin fairings.... closer to stock the better.

Online Red

  • Post Master
  • *****
  • Posts: 1310
  • Gender: Male
    • http://www.revival.tv
Re: Carbon Fiber bodywork......
« Reply #1 on: January 12, 2020, 10:26:12 AM »
1999 Prostar West Super Gas Champion !
2000 NMRA / Prostar Pro E/T runner up.
2001, 2002, & 2003 NMRA Pro E/T Champion !
2004 #3, 2005, & 2006 NMRA Pro E/T runner up.
2007 Pro. St. Legal #6, NMRA Pro E/T Champion !
2008 MDRA Super Streetbike Champion !

Offline Crazyarch

  • Apprentice Post Whore
  • **
  • Posts: 11
  • Enthusiast
Re: Carbon Fiber bodywork......
« Reply #2 on: January 12, 2020, 04:51:50 PM »
Just my front fender and fairing inners


Offline ADMIN

  • Administrator
  • Post Master
  • *****
  • Posts: 1521
Re: Carbon Fiber bodywork......
« Reply #3 on: January 12, 2020, 06:44:43 PM »
Catalyst So-Lo tank

Motorhead got me the dash inners, I think they may also be from Catalyst Composites...

Sides from China via eBay

Tail, not sure?

It takes patience and time over stock to r&r
Closed course. Professional rider. Do not attempt.

Still privately owned and operated by Hayabusa owner enthusiasts. 2002, small  a/a kit, CF body

SuzukiHayabusa.org's Fastest street mod bike member
WildBro
William Bill Warner
311.945 MPH

Online turbojonn

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 3120
  • Friends don't let friends use boost.
Re: Carbon Fiber bodywork......
« Reply #4 on: January 12, 2020, 09:59:08 PM »
Motocomposites.com are the best I found. I have their tail section, inners, dash trim, hump, fender and  side fairings. They are all as perfect as stock. Also, less expensive than OEM plastics.
« Last Edit: January 13, 2020, 08:13:46 AM by turbojonn »
RCC turbos rock!!! Rcc- Ultra plenum, case saver, Carillo rods, Wossner pistons, APE springs/tool steel shift shafts, Ferrara valves, ARP studs, lightened and balanced crank, Boostbysmith ecu editor, AMS 1000 with CO2, 420 hp. Mac arm 0-6 over, BST carbon fiber rims. Someday I'm goin' fast!

Offline Ali123

  • Rider
  • ***
  • Posts: 187
  • Enthusiast
Re: Carbon Fiber bodywork......
« Reply #5 on: January 13, 2020, 10:27:16 AM »
nice... got any pics? i see that montgomery makes gen2 fairings for 3300 bucks...... wonder if its worth it?

Online turbojonn

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 3120
  • Friends don't let friends use boost.
Re: Carbon Fiber bodywork......
« Reply #6 on: January 13, 2020, 10:30:54 AM »
I can text you pics. Iíve never had much luck posting pics on the site. I ordered factory decals, 2008 orange and black, so it looks like the factory made a special addition. Fitment is spot on and zero flaws in the pieces.
RCC turbos rock!!! Rcc- Ultra plenum, case saver, Carillo rods, Wossner pistons, APE springs/tool steel shift shafts, Ferrara valves, ARP studs, lightened and balanced crank, Boostbysmith ecu editor, AMS 1000 with CO2, 420 hp. Mac arm 0-6 over, BST carbon fiber rims. Someday I'm goin' fast!

Offline Ali123

  • Rider
  • ***
  • Posts: 187
  • Enthusiast
Re: Carbon Fiber bodywork......
« Reply #7 on: January 13, 2020, 10:31:30 AM »
Catalyst So-Lo tank

Motorhead got me the dash inners, I think they may also be from Catalyst Composites...

Sides from China via eBay

Tail, not sure?

It takes patience and time over stock to r&r


I love the tank..... on a side note.... its nice to have an admin that isnt a condescending know it all running the show.... no snowflakes at suzukihayabusa.org.... i salute it!

Offline ADMIN

  • Administrator
  • Post Master
  • *****
  • Posts: 1521
Re: Carbon Fiber bodywork......
« Reply #8 on: January 13, 2020, 12:50:39 PM »
I can text you pics. Iíve never had much luck posting pics on the site. I ordered factory decals, 2008 orange and black, so it looks like the factory made a special addition. Fitment is spot on and zero flaws in the pieces.

Can you give it a try? Post one pic and let me know what happens. There may be new server side compression technology since you made the last attempt. Give it time to upload and compress, couple minutes max
Closed course. Professional rider. Do not attempt.

Still privately owned and operated by Hayabusa owner enthusiasts. 2002, small  a/a kit, CF body

SuzukiHayabusa.org's Fastest street mod bike member
WildBro
William Bill Warner
311.945 MPH

Offline ADMIN

  • Administrator
  • Post Master
  • *****
  • Posts: 1521
Re: Carbon Fiber bodywork......
« Reply #9 on: January 13, 2020, 12:51:38 PM »
Damn snowflakes are keeping me off the busa :lol:
Closed course. Professional rider. Do not attempt.

Still privately owned and operated by Hayabusa owner enthusiasts. 2002, small  a/a kit, CF body

SuzukiHayabusa.org's Fastest street mod bike member
WildBro
William Bill Warner
311.945 MPH

Offline ADMIN

  • Administrator
  • Post Master
  • *****
  • Posts: 1521
Re: Carbon Fiber bodywork......
« Reply #10 on: January 13, 2020, 12:55:36 PM »
Front fender from Catalyst held up when tested by a wild turkey in a high end sweeper. The turkey did not fair so well, but it made a pretty feather cloud :lol:
Closed course. Professional rider. Do not attempt.

Still privately owned and operated by Hayabusa owner enthusiasts. 2002, small  a/a kit, CF body

SuzukiHayabusa.org's Fastest street mod bike member
WildBro
William Bill Warner
311.945 MPH

Offline Ali123

  • Rider
  • ***
  • Posts: 187
  • Enthusiast
Re: Carbon Fiber bodywork......
« Reply #11 on: January 14, 2020, 07:30:52 AM »
Damn snowflakes are keeping me off the busa :lol:
\

NOBODY likes snowflakes..... thats never been disputed by ANYBODY. lol.

Online turbojonn

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 3120
  • Friends don't let friends use boost.
Re: Carbon Fiber bodywork......
« Reply #12 on: January 14, 2020, 08:02:07 AM »
I had a Honda spree when I was a teenager. That thing was great in the snow. You could put both feet down like out Riggers, then stand up, and then Tokyo drift all day long. It felt pretty cool, but it was still a Honda spree, so it was like screwing a fat chick. It still feels good, but itís embarrassing when your friends find out.
RCC turbos rock!!! Rcc- Ultra plenum, case saver, Carillo rods, Wossner pistons, APE springs/tool steel shift shafts, Ferrara valves, ARP studs, lightened and balanced crank, Boostbysmith ecu editor, AMS 1000 with CO2, 420 hp. Mac arm 0-6 over, BST carbon fiber rims. Someday I'm goin' fast!

Offline Ali123

  • Rider
  • ***
  • Posts: 187
  • Enthusiast
Re: Carbon Fiber bodywork......
« Reply #13 on: January 14, 2020, 03:06:32 PM »
I had a Honda spree when I was a teenager. That thing was great in the snow. You could put both feet down like out Riggers, then stand up, and then Tokyo drift all day long. It felt pretty cool, but it was still a Honda spree, so it was like screwing a fat chick. It still feels good, but itís embarrassing when your friends find out.

hahahahahahahahahahahaha....... ahhhhh the fat girls.... gotta love em.

Online Red

  • Post Master
  • *****
  • Posts: 1310
  • Gender: Male
    • http://www.revival.tv
Re: Carbon Fiber bodywork......
« Reply #14 on: January 15, 2020, 10:22:38 AM »
1999 Prostar West Super Gas Champion !
2000 NMRA / Prostar Pro E/T runner up.
2001, 2002, & 2003 NMRA Pro E/T Champion !
2004 #3, 2005, & 2006 NMRA Pro E/T runner up.
2007 Pro. St. Legal #6, NMRA Pro E/T Champion !
2008 MDRA Super Streetbike Champion !

Offline Ali123

  • Rider
  • ***
  • Posts: 187
  • Enthusiast
Re: Carbon Fiber bodywork......
« Reply #15 on: January 15, 2020, 01:03:43 PM »
if this was an other forum some ass jockey might get ya banned.