Haybusa Parts and Service Member Support

Author Topic: July Loring wvent  (Read 690 times)

Offline Nosgsx1300

  • Mad Post Whore
  • ******
  • Posts: 2461
  • Gender: Male
  • RCC GT4088R WHOOOT
July Loring wvent
« on: April 29, 2020, 02:26:04 PM »
Just registered.   Who else is coming?
RCC GT4088R
2011 Loring 204.88mph "naked"
2015 Loring 220.01743 MPH Faired in fifth gear

Offline Landspeed Larry

  • Rider
  • ***
  • Posts: 395
Re: July Loring wvent
« Reply #1 on: May 01, 2020, 05:51:42 AM »
Team Knecum-Forstall-DeLuca-Sabatinelli  registered. Two Busas and one of those Green bikes  :biggrin:   LSL
All motor all the time and a turbo now and then.

Offline Nosgsx1300

  • Mad Post Whore
  • ******
  • Posts: 2461
  • Gender: Male
  • RCC GT4088R WHOOOT
Re: July Loring wvent
« Reply #2 on: May 01, 2020, 06:27:36 AM »
Look forward to seeing everyone again


RCC GT4088R
2011 Loring 204.88mph "naked"
2015 Loring 220.01743 MPH Faired in fifth gear


Offline Busa3268

  • Rider
  • ***
  • Posts: 208
  • Enthusiast
Re: July Loring wvent
« Reply #3 on: May 02, 2020, 07:52:23 PM »
I hope to make it back this year
228.3 Naked Loring 2018

Offline Nosgsx1300

  • Mad Post Whore
  • ******
  • Posts: 2461
  • Gender: Male
  • RCC GT4088R WHOOOT
Re: July Loring wvent
« Reply #4 on: May 04, 2020, 04:38:24 AM »
Busa3268   What's the hope to?    bike apart?
RCC GT4088R
2011 Loring 204.88mph "naked"
2015 Loring 220.01743 MPH Faired in fifth gear

Offline Busa3268

  • Rider
  • ***
  • Posts: 208
  • Enthusiast
Re: July Loring wvent
« Reply #5 on: May 04, 2020, 07:47:36 AM »
Yup Kent there is still pieces of my cases up there.  2020 was my comeback year. And now this👎 Hope all is well with you
228.3 Naked Loring 2018

Offline zrxdean

  • Post Master
  • *****
  • Posts: 1873
Re: July Loring wvent
« Reply #6 on: May 05, 2020, 11:51:44 AM »
Team Knecum-Forstall-DeLuca-Sabatinelli  registered. Two Busas and one of those Green bikes  :biggrin:   LSL

I'm really looking forward to seeing everyone and making some passes on one of the best-built bikes in the world, even if it's a yellow one  :mrgreen:

Fingers crossed that the meet happens.


Offline speedduck

  • Post Whore
  • ****
  • Posts: 696
Re: July Loring wvent
« Reply #7 on: May 14, 2020, 07:21:46 AM »
Team Knecum-Forstall-DeLuca-Sabatinelli  registered. Two Busas and one of those Green bikes  :biggrin:   LSL

I'm really looking forward to seeing everyone and making some passes on one of the best-built bikes in the world, even if it's a yellow one  :mrgreen:

Fingers crossed that the meet happens.

Any pics of the bike ?

Offline Landspeed Larry

  • Rider
  • ***
  • Posts: 395
Re: July Loring wvent
« Reply #8 on: May 14, 2020, 12:21:56 PM »
Dean will be using the old Guppy engine. Crank, head and cams are 11 years old but rods and pistons were replaced several years back. Whole new 1650 engine designed , just waiting for rods from Austria, should ship this week.  LSL
All motor all the time and a turbo now and then.

Offline speedduck

  • Post Whore
  • ****
  • Posts: 696
Re: July Loring wvent
« Reply #9 on: May 14, 2020, 03:16:33 PM »
What special is there in the rods ?

Has it been on the standing mile before ?

Offline Landspeed Larry

  • Rider
  • ***
  • Posts: 395
Re: July Loring wvent
« Reply #10 on: May 14, 2020, 04:39:07 PM »
Bike ran 214.6 in mile last Fall. Steve was unable to make a clean run due to a faulty steering damper. For Dean this will seem like slow motion, he probably will read the newspaper during his run  :biggrin: having been about 270 there a decade ago. 1650 engine is 86x71 with new Ti rods 20% lighter while being considerably longer. Pistons and rings are state of the art with advanced camshaft design. Headwork is ongoing with one done another in progress. I am old and out of time, nothing was spared for this build. Chassis now has Ohlins forks with carbon wheel. Dean's engine is the old 1697. If we get it done the 1650 will be in an M chassis and will look similar without the wheels but with a custom made DME sidewinder to match that engine's characteristics.  LSL
All motor all the time and a turbo now and then.

Offline speedduck

  • Post Whore
  • ****
  • Posts: 696
Re: July Loring wvent
« Reply #11 on: May 15, 2020, 02:47:53 AM »
This is going to be great, i really like the fast n/a mile bikes, not too many out there.
Wild guess it would be somewhere around 230+, if the weather is not against.

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7309
  • Gender: Male
Re: July Loring wvent
« Reply #12 on: May 24, 2020, 10:46:33 AM »
Looking forward to see what you guys can get out of that build with all of the fancy parts and coatings Larry!
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning

Offline MJ Williams

  • Post Whore
  • ****
  • Posts: 524
  • Gender: Male
Re: July Loring wvent
« Reply #13 on: May 29, 2020, 04:58:33 PM »
Good luck you guys and go fast.
I'm so bummed that with Mojave and Colorado gone there is nothing for us left coasters on pavement.
Post up some speeds.
BTW do the Ti rods "grow" bit more than steel? Inquiring minds!!!
Have a Harley, spent lots of money on it, thought I had a fast motorcycle, bought a Busa, realized all I had was a fast Harley, not a fast motorcycle!

Offline sportbikeryder

  • OFF TOPIC
  • Universal Post Whore
  • **********
  • Posts: 7309
  • Gender: Male
Re: July Loring wvent
« Reply #14 on: May 31, 2020, 08:47:30 AM »
Good luck you guys and go fast.
I'm so bummed that with Mojave and Colorado gone there is nothing for us left coasters on pavement.
Post up some speeds.
BTW do the Ti rods "grow" bit more than steel? Inquiring minds!!!

Given the same cross sectional area, Ti rods will "stretch" more than steel. Stiffness of Ti is about 60% that of steel. Aluminum stiffness is about 30% that of steel.
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.32mph 1/4 mile Riding

4.392, 176.79mph 1/8th mile  6.610, 228.15mph 1/4 mile Tuning