So I’ll start with I fed up ... 🤦♂️ so from the beginning I spun a rod bearing on my 07 busa ,it’s a 100% stock , and I figured instead of buying another motor I would just take mine apart and assess the damage and go from there so i take it all apart the head the jug and both are good my jug has no damage so I continue and now I’m down to the main case. So I’m taking the bolts out of the top and then I picked the motor up and flipped it over and I go to remove the bottom main case bolts inside the oil pan and I then see these two little springs and what looks like plungers that sit inside the springs.... I have no idea where they go I tried going through some of the online service manual but I can’t seem to find them in it does anyone here know what they are and where they go I would truly appreciate any help, I attached some photos of them and I put them next to one of the small bolts just for a size comparison, I would truly appreciate all help thank you !!