Haybusa Parts and Service Member Support

Author Topic: Help!! With two internal motor parts.  (Read 171 times)

Offline Darrenmiller7704

  • New User!
  • *
  • Posts: 3
  • Enthusiast
Help!! With two internal motor parts.
« on: October 14, 2020, 03:47:41 AM »
So Iíll start with I fed up ... 🤦‍♂️ so from the beginning I spun a rod bearing on my 07 busa ,itís a 100% stock , and I figured instead of buying another motor I would just take mine apart and assess the damage and go from there so i take it all apart the head the jug and both are good my jug has no damage so I continue and now Iím down to the main case. So Iím taking the bolts out of the top  and then I picked the motor up and flipped it over and I go to remove the bottom main case bolts inside the oil pan and  I then see these two little springs and what looks like plungers that sit inside the springs....  I have no idea where they go I tried going through some of the online service manual but I canít seem to find them in it does anyone here know what they are and where they go I would truly appreciate any help, I attached some photos of them and I put them next to one of the small bolts just for a size comparison, I would truly appreciate all help thank you !!

Offline Oz Booster

  • Site Donor
  • Mad Post Whore
  • *
  • Posts: 3965
  • aka Maj T
Re: Help!! With two internal motor parts.
« Reply #1 on: October 16, 2020, 03:32:07 PM »
Contact pins from behind the gear position switch
Official Site Donor

Offline Darrenmiller7704

  • New User!
  • *
  • Posts: 3
  • Enthusiast
Re: Help!! With two internal motor parts.
« Reply #2 on: October 17, 2020, 07:18:23 PM »
Thank you 🙏 😁😎 your a big help and life saver !! Lol.