Haybusa Parts and Service Member Support

Author Topic: NO POWER TO STARTER OR PUMP ANY IDEAS  (Read 4705 times)

Offline Busarider05

  • New User!
  • *
  • Posts: 1
  • Enthusiast
NO POWER TO STARTER OR PUMP ANY IDEAS
« on: March 29, 2023, 09:26:55 AM »
looking for any ideas on a repair.   i have a new battery, when key is turned the starter relay clicks, and the lights on the pc3 come on  after about 3-5 seconds it clicks again and the lights go out on the pc3 . i have power into the starter solenoid, but no power coming out to the starter.  when i turn the key  headlight and tailight come on .  any ideas

Offline Stainless1

  • Rider
  • ***
  • Posts: 419
  • Gender: Male
Re: NO POWER TO STARTER OR PUMP ANY IDEAS
« Reply #1 on: March 29, 2023, 11:15:14 PM »
Clutch switch is my first guess... do you have a meter so you can check that ground is going through the switch?
Bonneville 200 MPH Club
245 MPH Turbo Busa Powered Lakester
208.959 MPH NA GSXR 1000

Offline turbojonn

  • OFF TOPIC
  • Mad Post Whore
  • **********
  • Posts: 3150
  • Friends don't let friends use boost.
Re: NO POWER TO STARTER OR PUMP ANY IDEAS
« Reply #2 on: March 31, 2023, 08:44:38 AM »
Kickstand switch or wires?
RCC turbos rock!!! Rcc- Ultra plenum, case saver, Carillo rods, Wossner pistons, APE springs/tool steel shift shafts, Ferrara valves, ARP studs, lightened and balanced crank, Boostbysmith ecu editor, AMS 1000 with CO2, 475 hp. Mac arm 0-6 over, BST carbon fiber rims. Someday I'm goin' fast!