Haybusa Parts and Service Member Support

Author Topic: Lee's bored T-bodies  (Read 5867 times)

Offline The Olde King

  • Post Whore
  • ****
  • Posts: 833
Lee's bored T-bodies
« on: January 07, 2003, 12:19:00 AM »
Lee's performance offers " bored" t-bodies for $300 exchange. He claims a gain of 2 to 3 h.p. If this claim is true, then it is not a bad value.Has anyone purchased these? How did they perform?These are not the same as the set of "cleaned up" bodies that Dennis offers for around that same price?

Offline DaveO

  • Legacy Rider
  • Mad Post Whore
  • *
  • Posts: 2490
Lee's bored T-bodies
« Reply #1 on: January 07, 2003, 07:49:00 AM »
King,

They work well, especially for the $$$$. I had them flow benched against the stockers, and the bored Tbodies with bigger plates. They were VERY close to the bodies with bigger plates.

Dave
220.312 at Maxton...ALL MOTOR

www.NewLimitsTuning.com

OFFICIAL SITE SPONSOR

Offline The Olde King

  • Post Whore
  • ****
  • Posts: 833
Lee's bored T-bodies
« Reply #2 on: January 07, 2003, 08:50:00 AM »
Dave, thanks for the info. I will give these T- bodies a try.

THEMOTORHEAD

  • Guest
Lee's bored T-bodies
« Reply #3 on: January 07, 2003, 10:24:00 AM »
BORED  THE BACK SIDE LIKE I DID 2.5 MM IS WHAT I DID EM AT
AND HAND BLENDED THE FRONT SECTION

Offline rotts4u

  • Post Whore
  • ****
  • Posts: 680
Lee's bored T-bodies
« Reply #4 on: January 07, 2003, 07:30:00 PM »
I had him do mine for the Big poppa pimp project bike on dragbike.com and they work well. Not only does he bore them but he also did some sort of epoxy on the outside I assume to make the much thinner body stronger.

Don

Offline 1Busa1300cc

  • Rider
  • ***
  • Posts: 31
Lee's bored T-bodies
« Reply #5 on: January 07, 2003, 09:10:00 PM »
Will this have any gain on a stock motor Will it hurt the low end?

Offline Gixx1300R

  • Mad Post Whore
  • ******
  • Posts: 2042
Lee's bored T-bodies
« Reply #6 on: January 07, 2003, 09:37:00 PM »
I bore Throttle Bodies 48mm and install Stainless Steel blades
War is nothing more than Old Men talking while Young men die

Offline MikeyWayho

  • Rider
  • ***
  • Posts: 361
Lee's bored T-bodies
« Reply #7 on: January 07, 2003, 10:12:00 PM »
quote:
Originally posted by Gixx1300R:
I bore Throttle Bodies 48mm and install Stainless Steel blades

What's your price?
Mike Bain
GSXRacing
Bitter/Sweet Motorsports