Haybusa Parts and Service Member Support

Author Topic: Replacing a seal. Need Help  (Read 5545 times)

  • Guest
Replacing a seal. Need Help
« on: March 30, 2003, 08:27:00 PM »
Can anyone tell me the best way to replace the clutch pushrod seal? Can it be done without splitting the cases?  

Offline project260

  • Post Whore
  • ****
  • Posts: 503
Replacing a seal. Need Help
« Reply #1 on: March 31, 2003, 08:05:00 AM »
SPLIT THE CASES  
the fastest and you know it

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Replacing a seal. Need Help
« Reply #2 on: March 31, 2003, 03:31:00 PM »
it can be done with out  splitting the cases. But i would not do it to my bike>you have to grind the ceases a little pull out the seal and replace with a new one and then goop a bunch of silicon on there

Offline Steve A

  • Universal Post Whore
  • *******
  • Posts: 9155
  • Gender: Male
Replacing a seal. Need Help
« Reply #3 on: March 31, 2003, 04:22:00 PM »
There was someone a while back from, I believe, Arizona who had a neat little deal you used to keep all the crud out of the clutch slave cylinder.  I'd think you could possibly use one of those and put a seal under it - over the original one.  Someone may remember who it was that had them.

Offline Shamrock

  • Post Apocalyptic Whore
  • ********
  • Posts: 10171
  • Gender: Male
    • Shamrock Racing
Replacing a seal. Need Help
« Reply #4 on: March 31, 2003, 05:11:00 PM »
people were using a 2 liter pop bottle cap

Offline Steve A

  • Universal Post Whore
  • *******
  • Posts: 9155
  • Gender: Male
Replacing a seal. Need Help
« Reply #5 on: March 31, 2003, 05:51:00 PM »
The bottle cap will work for keeping the crud out but I don't think it will work very well as a seal.

Offline SJJBusa

  • Mad Post Whore
  • ******
  • Posts: 2399
Replacing a seal. Need Help
« Reply #6 on: March 31, 2003, 09:08:00 PM »
Here you go.....

Regards,

SJJBusa

THEMOTORHEAD

  • Guest
Replacing a seal. Need Help
« Reply #7 on: March 31, 2003, 10:58:00 PM »
I CUT A SEAL DOWN AND SILICONE IT OVER THE OLD 1