Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Air Shifter Problems  (Read 3235 times)

Offline Soup57

  • Apprentice Post Whore
  • **
  • Posts: 7
Air Shifter Problems
« on: July 27, 2003, 11:01:00 PM »
A line to my air shifter has blown 3 times.  And also when the shifter did work, It would miss my first two shifts, I had like 135-140 psi in. Every time it blew had just finished my dry hop. What pressure do most racers run, any remedy for blown line mps box to the tank.
Logged

Offline Rice Ya

  • Legacy Rider
  • Universal Post Whore
  • *
  • Posts: 5714
Air Shifter Problems
« Reply #1 on: July 28, 2003, 12:15:00 AM »
Set your air kill for a longer amount (clockwise)and try running at 120psi.
As for the air line check to see if its running to close to heated areas on the engine. I got some good line from Parker Hanifin.
http://globalfluid.com/#
Logged
Untill you give it everything you've got, you won't know if you got what it takes. Dave Schultz

Offline Busa for hire

  • Universal Post Whore
  • *******
  • Posts: 6702
  • Gender: Male
Air Shifter Problems
« Reply #2 on: July 28, 2003, 07:36:00 PM »
what kind of connectors are you using on the line? Is it blowing the line or at a union?
Logged
previously owned a 01 blk/gry Busa little of this little of that...oh yeah and a ghetto turbo 320horse/200ft.lb. 8.92@169
Bikeless....for now.

Offline E-RACER

  • Universal Post Whore
  • *******
  • Posts: 9408
Air Shifter Problems
« Reply #3 on: July 30, 2003, 12:54:00 AM »
Don't go over 120 lbs..No reason to go that high..

And make sure if the line is running near heat to shield it using a piece of rubber Hose over it or?

As for the missed shifts,make sure your shifter Isn't to low or high,You want the shift Cyl shaft to be in the middle giving it enough throw for the shift..

Just to let you know..    
Logged
Pages: [1]   Go Up
« previous next »