Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: NOS install questions  (Read 4668 times)

Offline Rich

  • Rider
  • ***
  • Posts: 463
NOS install questions
« on: April 22, 2004, 01:48:17 PM »
I am going to be installing a 40shot and I have the busa 4"'s out and I am lowering it 2"'s in the back and 1.25 in the front.  I am also putting a full throttle switch on it for arming it.  I was wondering it anyone can email me at home to make sure I wiring it right.  I have a diagram that I drew up I would like someon to look over it and make sure it is all right.  I got the schnitz racing kit, it came with steel braided lines.  I also have a schnitzracing 2 dial progressive controller, and I have a PCIIIr installed.  Thanks in advance for the help.

    kovacsrich@earthlink.net
Logged
2002 Hayabusa (Blue/Black)
2003 Gixxer 750

Offline Rice Ya

  • Legacy Rider
  • Universal Post Whore
  • *
  • Posts: 5714
NOS install questions
« Reply #1 on: April 23, 2004, 12:36:57 AM »
Logged
Untill you give it everything you've got, you won't know if you got what it takes. Dave Schultz

Anonymous

  • Guest
NOS install questions
« Reply #2 on: April 23, 2004, 12:55:18 AM »
I have the manual, but it does not show me exactly what I need.  I have figured it out.  I talked to Johnny Cheese to verify the wiring diagram!
Logged

Offline Rich

  • Rider
  • ***
  • Posts: 463
NOS install questions
« Reply #3 on: April 27, 2004, 11:24:30 AM »
I got it all hooked up right.  If anyone is needing a schematic I have one that drew up on paint program.  It is pretty much like the one that is in the manual but I took out the fuel and safety solenoid and the fuel pump.  Plus I had to get the right relay.
Logged
2002 Hayabusa (Blue/Black)
2003 Gixxer 750

Offline Rich

  • Rider
  • ***
  • Posts: 463
NOS install questions
« Reply #4 on: April 30, 2004, 07:05:49 PM »
I have the NX kit!
Logged
2002 Hayabusa (Blue/Black)
2003 Gixxer 750
Pages: [1]   Go Up
« previous next »