Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: yoshimura -pc3  (Read 3677 times)

Offline nmbusa

  • Rider
  • ***
  • Posts: 41
yoshimura -pc3
« on: May 21, 2004, 10:45:44 AM »
hi fellow Busa owners.recently purchased a yoshimura rs3 full with titanium cannister but apparantly the pc3-usb didn't arrive due to backorder.my question is will my busa work if I mount the rs3 since I'm getting pissed having it sitting in it's box for another 10 days without the pc3.
Logged

Offline Busa Quick

  • Post Master
  • *****
  • Posts: 1226
yoshimura -pc3
« Reply #1 on: May 21, 2004, 06:50:45 PM »
I am running with out any Power Commander with my RS-3 Race system and I run fine but, it would probably run better with a PC3R.


 Mark
Logged
Black and Purple 04, MY MODS: Turbo, .08 spacer, s2000 injectors, yosh cams 7.2 spring, heavy clutch springs, APE valve springs, raised rev limiter to 11,500 rpm with ignition cut only, using only stock ECM with Petrik reprogramming method,

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
yoshimura -pc3
« Reply #2 on: May 21, 2004, 09:30:47 PM »
Quote from: Busa Quick
I am running with out any Power Commander with my RS-3 Race system and I run fine but, it would probably run better with a PC3R.


 Mark


Same for me... :)
Logged

Offline BadSouthernBusa

  • Rider
  • ***
  • Posts: 486
yoshimura -pc3
« Reply #3 on: May 24, 2004, 09:24:30 AM »
ran with out one for a year , It should just be rich . No major problems here though .
Logged

Offline nmbusa

  • Rider
  • ***
  • Posts: 41
yoshimura -pc3
« Reply #4 on: May 24, 2004, 10:39:14 AM »
thanks to all, took your advise and put on the yosh pipe.Does look to run a little rich though but the noise compared to stock is abit on the loud side or is it my imagination?
Logged

Offline Busa Quick

  • Post Master
  • *****
  • Posts: 1226
yoshimura -pc3
« Reply #5 on: May 25, 2004, 04:49:18 PM »
Loud side...na just right with a helmet on. I couldn't here my stock pipes when I was on the interstate. I do have to putt around town if I want to be quite.

Mark
Logged
Black and Purple 04, MY MODS: Turbo, .08 spacer, s2000 injectors, yosh cams 7.2 spring, heavy clutch springs, APE valve springs, raised rev limiter to 11,500 rpm with ignition cut only, using only stock ECM with Petrik reprogramming method,
Pages: [1]   Go Up
« previous next »