Haybusa Parts and Service Member Support
« previous next »
Pages: [1] 2 3   Go Down

Author Topic: busa motor swap into a gsxr1000  (Read 33353 times)

Offline chaplain X

  • Apprentice Post Whore
  • **
  • Posts: 17
busa motor swap into a gsxr1000
« on: October 30, 2004, 06:39:34 PM »
Does any one know of a shop that sells a kit to do this   (ie. motor mounts) ect.  have a 2002 gsxr and want to put a built busa motor in it...
Logged

Offline TRNorBRN6001

  • Post Master
  • *****
  • Posts: 1705
busa motor swap into a gsxr1000
« Reply #1 on: November 06, 2004, 11:19:21 AM »
:idea: How about that Busa motor into a GSXR 600
  :shock:  :shock:  :shock:  :shock:  :bah:  :bah:  :bah:  :duh:  :duh:  :duh:  :duh:
Logged

Offline pchblq

  • Post Whore
  • ****
  • Posts: 702
  • Gender: Male
busa motor swap into a gsxr1000
« Reply #2 on: November 06, 2004, 11:35:11 AM »
Quote from: TRNorBRN6001
:idea: How about that Busa motor into a GSXR 600
  :shock:  :shock:  :shock:  :shock:  :bah:  :bah:  :bah:  :duh:  :duh:  :duh:  :duh:


Laugh if you will but it's been done also.

Lee Shierts
Lee's Performance in Charlotte did it I think, they called it baby busa.
 :wink:
Logged
Damn Damn Damn Damn...

GoldenChild

  • Guest
Busa 600
« Reply #3 on: November 07, 2004, 03:56:07 AM »
The first one was a 750 with a busa motor and the second is a 600 with a busa motor called the SCUDand lee sells the kit plates to mount it.
Logged

Offline chaplain X

  • Apprentice Post Whore
  • **
  • Posts: 17
busa motor swap into a gsxr1000
« Reply #4 on: November 07, 2004, 10:25:45 AM »
now a busa motor into a 600, factory d-cals, hide as much as you can put a quiet exhaust on it stretch the swing arm 1-2 in. and go hunting ltr. bikes....................now that sounds like a good time...............aaaahhhhh the look of disbelief would be worth the coin.................
Logged

Offline screwsloose

  • Rider
  • ***
  • Posts: 240
  • Gender: Male
    • Great Lakes RaceCraft
busa motor swap into a gsxr1000
« Reply #5 on: November 29, 2004, 08:39:49 PM »
lee's scuds fly no duobt about that!!!
he requires a busa doner frame for mounts
Mcintosh machines conversion is the nicest i have seen
they look factory inside and outside the platic
Mcintosh Machine        Terry
937-687-3936
Logged
616-325-5571

Offline Busa,Inc

  • Apprentice Post Whore
  • **
  • Posts: 15
busa motor swap into a gsxr1000
« Reply #6 on: December 05, 2004, 07:34:30 PM »
just a note to those interested. I have installed a busa motor in both a GSXR 600 and a 1000, I do not sell a kit because I make all new motor mounts and dont require a donor busa frame. all mounts are made from billet aluminum and welded. if anyone is interested contact me at Busa_Inc@webtv.net       p.s The GSXR600 "babybusa" was done by me not Lee's in Charlotte,NC ......    
Logged

gwizz509

  • Guest
busa motor swap into a gsxr1000
« Reply #7 on: December 05, 2004, 10:03:04 PM »
We can do it but we don't have a kit we actually use your motor mounts! We reloctae everything to fit! 800.00 and you provide the motor! We have done 6 of them so far!
Logged

Offline SPEED KING

  • Post Apocalyptic Whore
  • ********
  • Posts: 12439
  • Gender: Male
busa motor swap into a gsxr1000
« Reply #8 on: December 05, 2004, 11:01:18 PM »
Quote from: Busa,Inc
just a note to those interested. I have installed a busa motor in both a GSXR 600 and a 1000, I do not sell a kit because I make all new motor mounts and dont require a donor busa frame. all mounts are made from billet aluminum and welded. if anyone is interested contact me at Busa_Inc@webtv.net       p.s The GSXR600 "babybusa" was done by me not Lee's in Charlotte,NC ......    


Where are you located..?
Logged
First sidecar over 200mph @ 218+ also the fastest ever record!
Fastest Open bike over a mile from 2005-2008 @ 259.393
Fastest NAKED record El Mirage @ 240+ come get some!
Fastest bike ever at ELMO 240.197  "NAKED BABY"
Congrats to Richard Assen 260.7

Offline Busa,Inc

  • Apprentice Post Whore
  • **
  • Posts: 15
busa motor conversion
« Reply #9 on: December 06, 2004, 05:03:56 AM »
I am in Winston-Salem,NC  if interested e-mail me for phone number...
Logged

Offline TRNorBRN6001

  • Post Master
  • *****
  • Posts: 1705
busa motor swap into a gsxr1000
« Reply #10 on: December 06, 2004, 09:00:14 AM »
Just curious, any difference doing the 1000 or 600?

Other than Motor mounts and engine wouldn't you also need the ECU and wiring harness from the Busa? Any other things needed?

What does a typical custom conversion billet motor mount set cost?

$800 is a good price for all the electrical, mount mod, and plane hassle.  :D

You all got me thinking way to much!  :wink:
Logged

Offline Busa,Inc

  • Apprentice Post Whore
  • **
  • Posts: 15
busa motor swap into a gsxr1000
« Reply #11 on: December 06, 2004, 07:38:00 PM »
I dont sell motor mounts as a kit because I remove all stock mounts and make and install new billet mounts for for each application. and also trim out inside of frame for motor to be level and at correct height for true chain alignment and enclose inside of frame where it was clearanced inorder to keep the strength. and basically I did do the 600 & 1000 on the same idea for mounting the motor.....
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
busa motor swap into a gsxr1000
« Reply #12 on: December 07, 2004, 12:16:36 PM »
alright my question is i read somewhere that the gixxer 600 frame needed to be cut and reweld,.the gixxer 1000 has a wider frame hows the mods different with a busa motor in a 600 compared to 1000 cc frame.iam interested in a busa engine in my 1000 frame.does the busa engine slide in with a minor mod?cause iam woried about the frame being weakend by all the cutting and welding.oh yeah iam planning to put my velocity kit from my 1000 to the busa engine.
Logged

Offline TRNorBRN6001

  • Post Master
  • *****
  • Posts: 1705
busa motor swap into a gsxr1000
« Reply #13 on: December 07, 2004, 12:41:11 PM »
:shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:  :shock:
 :duh:  :duh:  :duh:  :duh:  :duh:  :duh:  :duh:  :duh:  :duh:  :duh:  :duh:  :duh:

Thats a lot of HP!!!!! Good Luck!!! Post us picks and numbers when your finished.
Does that HairDryer fit in the bike with Busa engine too?????????? :bah:

Mr. CheeseMan is not going to like me drooling over the idea of putting a Busa motor in a GSXR :(  :(  :(  :(  :cry:  :cry:  :cry:  :cry:  :cry:


But, I like your insane ideas! :wink:
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
busa motor swap into a gsxr1000
« Reply #14 on: December 07, 2004, 12:56:28 PM »
oh yeah i forger to ask do i use the busa or gixxer 1000 transmision?.
Logged

Offline TRNorBRN6001

  • Post Master
  • *****
  • Posts: 1705
busa motor swap into a gsxr1000
« Reply #15 on: December 07, 2004, 01:13:57 PM »
GSXR trans are you talking about gears or case?

I do not think either are interchangable, but what do I know :oops:
Logged

Offline Busa,Inc

  • Apprentice Post Whore
  • **
  • Posts: 15
busa motor swap into a gsxr1000
« Reply #16 on: December 07, 2004, 05:31:12 PM »
I do have some pics if anyone is interested...
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
busa motor swap into a gsxr1000
« Reply #17 on: December 07, 2004, 06:41:58 PM »
yea i dont think i can use gixxer tranny with busa engine.i called the dealer and they said that they dont sell long block busa engine and i need to buy the engine piece by piece,just the block is $800.no rods cranck or bearings.but like i said i am going to be doing this.when my engine blows up or what ever happens to it,i ll have the busa engine ready for install.and i figure sense the busa engine is out ill get a stroker and big bore kit.i think it comes somewhere around 1500cc or so.till then i need to buy parts.may be a year or so,i dont know but iam going to be doing this.just matter of time.
Logged

Offline TRNorBRN6001

  • Post Master
  • *****
  • Posts: 1705
busa motor swap into a gsxr1000
« Reply #18 on: December 10, 2004, 05:05:13 PM »
What about the electrical, and which ECU do you use Gixxer, Busa, or Both? or Gixxer with PC piggy back? Thanks for help as i might be picking up a 2002 600 gixxer for a good price.
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
busa motor swap into a gsxr1000
« Reply #19 on: December 10, 2004, 05:26:01 PM »
i would thing ecu and wiring has to come from the busa sense it has different map compared to 1000 or 600.its pretty much like having busa internals in the gixxer frame.lots of money.
Logged

Offline Busa,Inc

  • Apprentice Post Whore
  • **
  • Posts: 15
busa motor swap into a gsxr1000
« Reply #20 on: December 12, 2004, 07:43:28 PM »
I did use the Busa wire harness on the 600  did a clean mount of the busa gauge cluster on it and put the internal fuel pump from the Busa in the gsxr 600 gas tank inorder to keep same fuel pressure and volume....
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
busa motor swap into a gsxr1000
« Reply #21 on: December 17, 2004, 05:46:35 PM »
how about the radiator gixxer or busa?.
i also saw the muzzy big bock hayabusa engine.1470cc or something like that.think that would fit?,.
Logged

Offline Busa,Inc

  • Apprentice Post Whore
  • **
  • Posts: 15
busa motor swap into a gsxr1000
« Reply #22 on: December 17, 2004, 07:12:56 PM »
I did also use the busa radiator and mounted another fan on right side for extra cooling...the only difference in motor size is deck height of head which makes top 4 mounts a little off but can be modified to fit since it is only a very small difference but if you start with built motor there would no problem at all...
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
busa motor swap into a gsxr1000
« Reply #23 on: December 17, 2004, 07:37:12 PM »
ok now i need to save and buy parts.
thanks.
Logged

Offline TRNorBRN6001

  • Post Master
  • *****
  • Posts: 1705
busa motor swap into a gsxr1000
« Reply #24 on: December 18, 2004, 10:40:46 AM »
Too cool Busa Inc. Keep the good info coming.
Logged
Pages: [1] 2 3   Go Up
« previous next »