Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: 03 1000 clutch  (Read 3493 times)

Offline denny

  • Rider
  • ***
  • Posts: 147
03 1000 clutch
« on: August 17, 2005, 09:40:57 AM »
I have a 03 1000 with a brock cusion kit what plate /fiber do  I remove and what about stack hight. thanks
Logged

Offline BLUR AKA SIDEWAYS AKA KING OF SOUTH FLORIDA

  • Universal Post Whore
  • *******
  • Posts: 5144
Re: 03 1000 clutch
« Reply #1 on: September 04, 2005, 04:51:39 PM »
Quote from: denny
I have a 03 1000 with a brock cusion kit what plate /fiber do  I remove and what about stack hight. thanks


Remove the innnermost fiber and start with a steel facing the opposite direction of the other steels.(flat side facing towards the bike) You will be using nine steels and nine fibers. If you are installing a new clutch pack and you are dragracing I would use some of the old fibers(if any are still good)with the new ones.

It is also very important to adjust the free play adjuster.
Logged

Offline rdd

  • Apprentice Post Whore
  • **
  • Posts: 5
Re: 03 1000 clutch
« Reply #2 on: January 26, 2006, 10:51:41 PM »
Brock tries to keep his customers informed:
http://www.brocksperformance.com/Instructions/S10-CCK%201-2.htm

I hope this helps.
Logged
rdd
Pages: [1]   Go Up
« previous next »