Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Cush drive! Bearings?  (Read 3569 times)

Offline juice

  • Post Master
  • *****
  • Posts: 1223
Cush drive! Bearings?
« on: November 08, 2002, 09:58:00 AM »
A while back I was having a prob with some back and forth and side to side motion of my cushdrive when on the bike.(This was on my shoot out tire rim.I replaced the rubbers and bearing on the cush drive but still had some play.Now that I'm putting he bike back together .I put back on the street rim and noticed it's perfect.So it is only loose with the other rim witch is a stock rim also.Could it be the bearings on the rimitself that are bad that would cause this unwanted motion?
Thanks for the help!
Juice
Logged

THEMOTORHEAD

  • Guest
Cush drive! Bearings?
« Reply #1 on: November 08, 2002, 10:00:00 AM »
REMEMBER IT SUPPOSE TO FLOAT ALITTLE OR ELSE IT WOULDNT WORK
Logged

Offline juice

  • Post Master
  • *****
  • Posts: 1223
Cush drive! Bearings?
« Reply #2 on: November 08, 2002, 10:48:00 AM »
On 1 it's right and then on the other it's loose. Same cushdrive thow.That's why i suspect the rim bearings.Maybe?  
Logged
Pages: [1]   Go Up
« previous next »