Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Yoshimura intake cams  (Read 2055 times)

Offline stan1300

  • Rider
  • ***
  • Posts: 185
    • http://www.platinumknights.net
Yoshimura intake cams
« on: September 04, 2005, 06:21:19 PM »
Can some one give me feedback on how well the stock busa intake on the exhuast side works with the yoshimure intake cam?
Logged
84 Suzuki GS1150ES/08 blue hayabusa/08 Orange hayabusa

Offline Busa Quick

  • Post Master
  • *****
  • Posts: 1226
Yoshimura intake cams
« Reply #1 on: September 04, 2005, 08:05:56 PM »
I can tell you this, the specs on the Yosh cams are...INTAKE 9.0mm max lift adn 244Deg. duration starting at 1mm lift.    Exhaust 7.8mm lift and 230 duration starting at 1mm.

Mark
Logged
Black and Purple 04, MY MODS: Turbo, .08 spacer, s2000 injectors, yosh cams 7.2 spring, heavy clutch springs, APE valve springs, raised rev limiter to 11,500 rpm with ignition cut only, using only stock ECM with Petrik reprogramming method,
Pages: [1]   Go Up
« previous next »