Haybusa Parts and Service Member Support
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: RODS?  (Read 22861 times)

Offline Ramin

  • Rider
  • ***
  • Posts: 220
RODS?
« on: October 17, 2005, 10:21:20 PM »
HI GUYS
I AM REBUILDING MY 1K TURBO AND ILL BE CHANGING THE CONNECTING RODS.AIMING FOR OVER 350 HP.SO HEAR IS MY QUESTION.WHAT CONNECTING ROD SHOULD I GO WITH (CROWER , FALCON )AND WHAT MATERIAL STEEL , ALUMINUM OR TITANIUM.I AM PROBABLY NOT GOING TO SPENT MORE THAN $1200 FOR CONNECTING RODS.ITS A PROJECT SO I AM NOT IN A HURRY,I LIKE TO DO IT RIGHT WITH RIGHT PARTS.
Logged

Offline badass1000

  • Post Master
  • *****
  • Posts: 1551
Re: RODS?
« Reply #1 on: October 17, 2005, 10:33:07 PM »
well I have the same goal in mind.  03 gsxr 1000 with velocity stage 2
I had a set of falicons in my completly built motor.  A rod bearing seized up and shot the rod out the block.  Their was no knocking noise or anything.  It was on the dyno with the guy operating the dyno on the bike and I was right next to it.  It just blew up all of a sudden.  Granted the rod bearing seizing up didn't help anything.  Their was a lack of oil for some reason.  2 and 4 also had marks on the bearing and 3 seized.  Every person I have talked to and has seen the rod says not to use falicon rods.  The only person that recomends falicon is velocity.   I asked velocity why and they said that if a rod bearing goes out you can hear it and it will hold together long enough to shut off motor before it breaks.  All others will just shoot out the motor and not give a warning.  I told them about mine and they said that was the first time they have ever heard that happen.
So I am putting the falicons in my back up motor and a set of je turbo pistons.  My good completly built motor will be getting a new set of carrilos when I re build it.
I know crowers are used in big busa motors with the bigger bolts.  I am not that experianced with turbo 1000 motors, but I know I will never use falicons again.
Hopefully dennis can give some recomendations on crower over carrilo.
Logged

Offline zrxdean

  • Post Master
  • *****
  • Posts: 1909
Re: RODS?
« Reply #2 on: October 17, 2005, 11:24:24 PM »
If money is not an issue, I would go with Carrillo steel H-beam rods. -Dean
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
Re: RODS?
« Reply #3 on: October 18, 2005, 01:03:40 AM »
 I'LL GO WITH CARILLOS THEN.
THANKS.
Logged

Offline SPEED KING

  • Post Apocalyptic Whore
  • ********
  • Posts: 12439
  • Gender: Male
Re: RODS?
« Reply #4 on: October 18, 2005, 09:20:09 AM »
Carrillo's all the way... :thumb:
Logged
First sidecar over 200mph @ 218+ also the fastest ever record!
Fastest Open bike over a mile from 2005-2008 @ 259.393
Fastest NAKED record El Mirage @ 240+ come get some!
Fastest bike ever at ELMO 240.197  "NAKED BABY"
Congrats to Richard Assen 260.7

Offline Boost231

  • Post Whore
  • ****
  • Posts: 778
Re: RODS?
« Reply #5 on: October 19, 2005, 08:57:17 PM »
+1 Carrillos
Logged

THEMOTORHEAD

  • Guest
Re: RODS?
« Reply #6 on: October 19, 2005, 10:12:31 PM »
Logged

Offline SPEED KING

  • Post Apocalyptic Whore
  • ********
  • Posts: 12439
  • Gender: Male
Re: RODS?
« Reply #7 on: October 20, 2005, 12:55:51 AM »
Logged
First sidecar over 200mph @ 218+ also the fastest ever record!
Fastest Open bike over a mile from 2005-2008 @ 259.393
Fastest NAKED record El Mirage @ 240+ come get some!
Fastest bike ever at ELMO 240.197  "NAKED BABY"
Congrats to Richard Assen 260.7

Offline zrxdean

  • Post Master
  • *****
  • Posts: 1909
Re: RODS?
« Reply #8 on: October 20, 2005, 09:34:58 AM »
+4 (now we have a full set)   :lol:
Logged

Offline Jay

  • Post Master
  • *****
  • Posts: 1935
Re: RODS?
« Reply #9 on: October 22, 2005, 12:43:11 PM »
Carrillo H beams
+5
http://hayabusazone.com/rods.html   :lol:

Jay
Logged

Offline plat03busa

  • Post Whore
  • ****
  • Posts: 798
  • Gender: Male
Re: RODS?
« Reply #10 on: October 27, 2005, 10:33:22 PM »
Hey I'm looking for some carrillo H beams.... if anyone have some for a good price call me @254-220-3120.. Theo
Logged
Gettofied

Offline JorNic Motorsports

  • Restricted
  • Mad Post Whore
  • ******
  • Posts: 4388
  • Gender: Male
Re: RODS?
« Reply #11 on: October 27, 2005, 11:31:44 PM »
stir the pot.
crower. a little less money, nice clean product and proven to over 600hp.
Logged

THEMOTORHEAD

  • Guest
Re: RODS?
« Reply #12 on: October 28, 2005, 12:24:01 AM »
Quote from: 3B or BBB on October 27, 2005, 11:31:44 PM
stir the pot.
crower. a little less money, nice clean product and proven to over 600hp.
PROBLEM IS GETTING THEM
THEY TAKE MONTHS
TILL THEY GET OFF THEIR ASS AND COMMIT TO STOCKING
NO ONES GUNNA WAIT
I CANT AFFORD TO WAIT I HAVE 10 BIKES TO DO NOW AND MORE SOON
BUNCHA BS :?
Logged

Offline SPEED KING

  • Post Apocalyptic Whore
  • ********
  • Posts: 12439
  • Gender: Male
Re: RODS?
« Reply #13 on: October 28, 2005, 12:43:17 AM »
Quote from: THEMOTORHEAD on October 28, 2005, 12:24:01 AM
Quote from: 3B or BBB on October 27, 2005, 11:31:44 PM
stir the pot.
crower. a little less money, nice clean product and proven to over 600hp.
PROBLEM IS GETTING THEM
THEY TAKE MONTHS
TILL THEY GET OFF THEIR ASS AND COMMIT TO STOCKING
NO ONES GUNNA WAIT
I CANT AFFORD TO WAIT I HAVE 10 BIKES TO DO NOW AND MORE SOON
BUNCHA BS :?

Why even question it, do a search and stick with the best...and that would be a Carrillo
Logged
First sidecar over 200mph @ 218+ also the fastest ever record!
Fastest Open bike over a mile from 2005-2008 @ 259.393
Fastest NAKED record El Mirage @ 240+ come get some!
Fastest bike ever at ELMO 240.197  "NAKED BABY"
Congrats to Richard Assen 260.7

Offline JorNic Motorsports

  • Restricted
  • Mad Post Whore
  • ******
  • Posts: 4388
  • Gender: Male
Re: RODS?
« Reply #14 on: October 28, 2005, 03:47:32 PM »
Quote from: THEMOTORHEAD on October 28, 2005, 12:24:01 AM
Quote from: 3B or BBB on October 27, 2005, 11:31:44 PM
stir the pot.
crower. a little less money, nice clean product and proven to over 600hp.
PROBLEM IS GETTING THEM
THEY TAKE MONTHS
TILL THEY GET OFF THEIR ASS AND COMMIT TO STOCKING
NO ONES GUNNA WAIT
I CANT AFFORD TO WAIT I HAVE 10 BIKES TO DO NOW AND MORE SOON
BUNCHA BS :?

have we ever seen eye to eye with anything I post on this board? ;)
Logged

Offline SPEED KING

  • Post Apocalyptic Whore
  • ********
  • Posts: 12439
  • Gender: Male
Re: RODS?
« Reply #15 on: October 28, 2005, 05:18:31 PM »
Quote from: 3B or BBB on October 28, 2005, 03:47:32 PM
Quote from: THEMOTORHEAD on October 28, 2005, 12:24:01 AM
Quote from: 3B or BBB on October 27, 2005, 11:31:44 PM
stir the pot.
crower. a little less money, nice clean product and proven to over 600hp.
PROBLEM IS GETTING THEM
THEY TAKE MONTHS
TILL THEY GET OFF THEIR ASS AND COMMIT TO STOCKING
NO ONES GUNNA WAIT
I CANT AFFORD TO WAIT I HAVE 10 BIKES TO DO NOW AND MORE SOON
BUNCHA BS :?

have we ever seen eye to eye with anything I post on this board? ;)

Yes, we both have a severe distaste for some of the same people.

Logged
First sidecar over 200mph @ 218+ also the fastest ever record!
Fastest Open bike over a mile from 2005-2008 @ 259.393
Fastest NAKED record El Mirage @ 240+ come get some!
Fastest bike ever at ELMO 240.197  "NAKED BABY"
Congrats to Richard Assen 260.7

Offline JorNic Motorsports

  • Restricted
  • Mad Post Whore
  • ******
  • Posts: 4388
  • Gender: Male
Re: RODS?
« Reply #16 on: October 28, 2005, 10:57:46 PM »
touche'
now, how do you spell it? jawn nuunin? ;)
Logged

THEMOTORHEAD

  • Guest
Re: RODS?
« Reply #17 on: October 29, 2005, 08:36:32 PM »
Quote from: 3B or BBB on October 28, 2005, 03:47:32 PM
Quote from: THEMOTORHEAD on October 28, 2005, 12:24:01 AM
Quote from: 3B or BBB on October 27, 2005, 11:31:44 PM
stir the pot.
crower. a little less money, nice clean product and proven to over 600hp.
PROBLEM IS GETTING THEM
THEY TAKE MONTHS
TILL THEY GET OFF THEIR ASS AND COMMIT TO STOCKING
NO ONES GUNNA WAIT
I CANT AFFORD TO WAIT I HAVE 10 BIKES TO DO NOW AND MORE SOON
BUNCHA BS :?

have we ever seen eye to eye with anything I post on this board? ;)
YA I THINK I SHOULD WAIT 6 MONTHS TILL RODS COME IN TO DO MOTORS FOR CUSTOMERS :?
DUDE I DO ALOT OF ENGINES :x
CARRILLOS WORK FINE FOR 99.9% OF THE PEOPLE
ID USE CROWERS ALOT MORE IF THEY HAD EM TO SELL
FACT IS I TOLD EM ID TAKE ALL THEY HAD PERIOD
WAITING ON KERRY NOW
Logged

Offline plat03busa

  • Post Whore
  • ****
  • Posts: 798
  • Gender: Male
Re: RODS?
« Reply #18 on: November 03, 2005, 09:26:39 AM »
Dennis please let me know when you get them (Pm) wanna upgrade this winter.  :D
Logged
Gettofied

Offline Gixx1300R

  • Mad Post Whore
  • ******
  • Posts: 2042
Re: RODS?
« Reply #19 on: November 04, 2005, 09:33:50 PM »
Get a set of Pankle Titanium Rods  :P :P :P :P :P
Logged
War is nothing more than Old Men talking while Young men die

Offline plat03busa

  • Post Whore
  • ****
  • Posts: 798
  • Gender: Male
Re: RODS?
« Reply #20 on: November 09, 2005, 02:32:33 PM »
How much does Pankle support
Logged
Gettofied

Offline gsxr1216

  • Post Master
  • *****
  • Posts: 1284
Re: RODS?
« Reply #21 on: November 09, 2005, 04:22:04 PM »
Quote from: Gixx1300R on November 04, 2005, 09:33:50 PM
Get a set of Pankle Titanium Rods  :P :P :P :P :P

Arent  they like $2200 a set?????? havent priced them in a while....
Logged

Offline JHerheim

  • Mad Post Whore
  • ******
  • Posts: 2432
  • Gender: Male
Re: RODS?
« Reply #22 on: November 09, 2005, 08:03:13 PM »
Quote from: plat03busa on November 09, 2005, 02:32:33 PM
How much does Pankle support
I believe that they are in most if not all F1 cars.  I think they would be highest dollar rod anywhere.   They are parent company of CP pistons.
Logged

Offline JHerheim

  • Mad Post Whore
  • ******
  • Posts: 2432
  • Gender: Male
Re: RODS?
« Reply #23 on: November 09, 2005, 08:06:30 PM »
Last year Rodger Dyers agreed to make a set out of M300.  I think they would hold all you could throw at them.  But I was looking at over 1600 for one off's I passed.    Crower has best bang for the buck in my opinion.  If you can wait for ever to get them.  2 months plus on each order.  Carrillo's are ususally readily availible and I think that you pay the extra $$ for convienence.  But they are great rods too.
Logged

Offline Kamikazek9

  • Rider
  • ***
  • Posts: 269
  • Gender: Male
Re: RODS?
« Reply #24 on: November 09, 2005, 10:26:23 PM »
what do you think of pauter rods?
Logged
SPEED---- Gotta Have IT !!!!
Pages: [1] 2  All   Go Up
« previous next »