Ive actually had great luck with the poly lines..I have condut over them so heat won't mess them up..
you will need>
1 Nitrous solenoid(not a fuel solenoid less psi on those) APROX $100 if you buy a Purge kit which you also need the adapter out if that also for the guage I prefer NX But NOS good too..
Liquid filled NX PSI Guage I have mine coming right off the botle with the before mentioned adapter that comes in the Purge kit
braided feed line depending on where You put the solenoid 2-3 feet..I mount them right near the rear brake resvoir
2 DRY nozzles and the nuts funnel jets,ferrels ect 2-#24 jets =aprox 40HP 2 #30jets 60hp ect
1 T to come out of the solenoid for the 2 braided or poly lines
NOS brand Bottle try to get a 2 lber!!
bootleg or NX valves break easily!!**and if your running it upsidedown Take the valve off and make sure the siphon tube is out!!**Verifiy this mod yourself..Dont take anyones word on this thats it already out..
2 way on/on togle to turn your Starter button into the Nitrous button(tap right under the seat into the sarter relay wire Green wire yellow tracer)and go to the center pole of the 2 way toggle,one back to the solenoid other back to starter relay
Some kind of bracket to hold the Bottle(if you bike is long you could Mount it in front of the tire)if not a 2lb will fit into the trunk
Thats it ...not much to it ..I built Mine for around $200..taste great less filling!!!
I got some stuff at a local Car shop and some off ebaY..the bottle and the solenoid cost the most..get new on both better off ...