Drill out the three holes in the outer clutch basket for improved oiling.They are in the outer clutch basket. If you dismantle the clutch entirely in the base of the outer clutch basket you will see 3 holes drilled in it for lubrication. Every other spoke of the hub is drilled as you can see indicated by the red arrows, every other one is left undrilled (red circles). There's even markings in the undrilled areas as if to indicate they should be drilled but weren't. In any event, just measure whatever the hole is in the 3 that are present and make the extra 3 holes in the basket.
Also drilled out some holes in the inner hub
Also installed the new BDE clutch cushion
Now i need heavy duty clutch springs i heard barnett