Hump mounted bottle??

[busa107]

Ok, I am looking at the bottle mount from Schnitz Racing the holds the bottle under the hump. Is anyone using one of these, and do you have to remove the siphon tube from inside the bottle?

[chevelle]

i have one,it works well,and yes you will have to remove the tube,because the valve is at the back of the bike,gravity fed,here are some pics of the bottle mount

[ny05busa]

Also have one, works very nice and my bottle came without a syphon tube.

[TrickTom1]

 

[2fast4u2c]

I'm glad you all like.  If you ever see anything you think could use improving, never hesitate to drop me a line.

Guy

[E-RACER]

Nice!!


ALWAYS verify the tube is out or in the bottle before using in any setup..

[busa107]

Thanks for the repilies looks like I will be ordering as well.
  Chevelle what is all that inline before the solenoid. Looks like a nice clean setup   

[chevelle]

thanks,right behind the solinoid is the pressure switch,allows you to adjust at what point the bottle heater shuts off,it is adjustable from 550-1250 lbs,i have mine set at 900,behind that is the sender for the digital pressure gauge,i now have it mounted on top of the 2 dial



i just ordered a dyno tune dry setup for my zx 12,should have it by the end of the week,that gas is very addictive

[n2o5o]

Stupid question, will a 2lb bottle fit in there? Thanks

[2fast4u2c]

It was designed with a 2LB bottle in mind.

[n2o5o]

Thanks, will be ordering one soon. Thanks again

[busa4speed]

  I also have your bottle kit and it works great the fit was perfit. I reused my white under side and had to just trim and use longer bolts but would be great if they would make quick disconeit bolts to take on and off.

[badboysbailagnt]

hey i want a setup like chevelles where do i get it