Author Topic: Who can guess???? (Read 10919 times) Tweet

DaveO · « **on:** February 19, 2006, 11:16:37 AM »

Can anyone guess what engine/setup this is????

Eracer your not allowed to guess....LOL

Good luck!!!!

Dave

tnfastbusa · « **Reply #1 on:** February 19, 2006, 11:47:26 AM »

gsxr 1000 05

mountainmotor · « **Reply #2 on:** February 19, 2006, 11:50:27 AM »

With a buttload of compression

DaveO · « **Reply #3 on:** February 19, 2006, 12:12:26 PM »

Quote from: tnfastbusa on February 19, 2006, 11:47:26 AM

gsxr 1000 05

Nope....next?

Dave

ny05busa · « **Reply #4 on:** February 19, 2006, 12:49:58 PM »

Carpenter 220 1397 kit?

tnfastbusa · « **Reply #5 on:** February 19, 2006, 12:57:39 PM »

it says 166.0 hp 87.2 torque wright or is it more

DaveO · « **Reply #6 on:** February 19, 2006, 02:12:04 PM »

Quote from: tnfastbusa on February 19, 2006, 12:57:39 PM

it says 166.0 hp 87.2 torque wright or is it more

That is correct.....

Dave

gnd111 · « **Reply #7 on:** February 19, 2006, 02:53:40 PM »

Is it a new GSXR 750...???....

BUSA_STEVE · « **Reply #8 on:** February 19, 2006, 03:15:15 PM »

The new ZX-14

tnfastbusa · « **Reply #9 on:** February 19, 2006, 03:45:56 PM »

new r1 with mods or a zx 10 with mods

Yngve · « **Reply #10 on:** February 19, 2006, 04:42:26 PM »

Old GS1100 with 1327 and ported head.....

Revalot # 1 · « **Reply #11 on:** February 19, 2006, 04:52:41 PM »

04 GSXR 750 with a 40 shot of NOS.

FASBUS · « **Reply #12 on:** February 19, 2006, 04:55:35 PM »

zx-11

FASBUS · « **Reply #13 on:** February 19, 2006, 05:02:39 PM »

cams @ 105/105 175-180 jet sizes ZX9?

FASBUS · « **Reply #14 on:** February 19, 2006, 05:07:38 PM »

could be 01-03 gixx. 1k limiter would come in about 12,200 unless its a 6th gear pull.
Would need some xtra compression for 86ft. lbs. though & 166hp would be a little low for application
unless stock cams & head.

DarkFalcon · « **Reply #15 on:** February 19, 2006, 05:10:38 PM »

zx12 with slip-on, no pc and too little air in the tire. 02 black/gold. Torque is a little low though but spikes at 9k. Second geuss is big block zx 9.

Quijinn · « **Reply #16 on:** February 19, 2006, 05:16:31 PM »

Going to say a piped Busa with a extended ecu

and cams changed to move hp up. Ok thats its I win haha

yah right lol

Revalot # 1 · « **Reply #17 on:** February 19, 2006, 05:17:27 PM »

Last try, A GSXR 1100, thats had some Big Motor Work

pr111 · « **Reply #18 on:** February 19, 2006, 05:24:17 PM »

With that kind of torque it's gotta be around 1200cc. I'm inclined to agree with the ZX-12 choice.

Gixxer1300r · « **Reply #19 on:** February 19, 2006, 05:24:33 PM »

looks like a stock busa with pipe, air box mod and a filter.

kawaski zxr 1100 or 1200 with work

maybe a 1200 bandit.

Gixxer1300r · « **Reply #20 on:** February 19, 2006, 05:27:15 PM »

how about that new busa killer from BMW

or yamahas FJZ1300 with mods

a built 1100 black bird

TL1000 with a ton of work

FASBUS · « **Reply #21 on:** February 19, 2006, 05:30:36 PM »

were the hell does an fzr1000 rev to anyway?

THEMOTORHEAD · « **Reply #22 on:** February 19, 2006, 05:54:54 PM »

zzr1200

Wolf1397 · « **Reply #23 on:** February 19, 2006, 06:04:36 PM »

Suzuki GSXR 1100 89-92 bored to 1216 cc and ported head, cams etc.

Wolf

DaveO · « **Reply #24 on:** February 19, 2006, 06:09:01 PM »

Quote from: Kid Quick on February 19, 2006, 05:17:27 PM

Last try, A GSXR 1100, thats had some Big Motor Work

No the last one made 220rwhp on C16....340rwhp on NOS....

One of you is VERY close.........Which ONE??? I need CC's.....

Dave

News:

Author Topic: Who can guess???? (Read 10919 times) Tweet

THEMOTORHEAD