Author Topic: Who can guess???? (Read 10920 times) Tweet

DaveO · « **on:** February 19, 2006, 11:16:37 AM »

Can anyone guess what engine/setup this is????

Eracer your not allowed to guess....LOL

Good luck!!!!

Dave

tnfastbusa · « **Reply #1 on:** February 19, 2006, 11:47:26 AM »

gsxr 1000 05

mountainmotor · « **Reply #2 on:** February 19, 2006, 11:50:27 AM »

With a buttload of compression

DaveO · « **Reply #3 on:** February 19, 2006, 12:12:26 PM »

Quote from: tnfastbusa on February 19, 2006, 11:47:26 AM

gsxr 1000 05

Nope....next?

Dave

ny05busa · « **Reply #4 on:** February 19, 2006, 12:49:58 PM »

Carpenter 220 1397 kit?

tnfastbusa · « **Reply #5 on:** February 19, 2006, 12:57:39 PM »

it says 166.0 hp 87.2 torque wright or is it more

DaveO · « **Reply #6 on:** February 19, 2006, 02:12:04 PM »

Quote from: tnfastbusa on February 19, 2006, 12:57:39 PM

it says 166.0 hp 87.2 torque wright or is it more

That is correct.....

Dave

gnd111 · « **Reply #7 on:** February 19, 2006, 02:53:40 PM »

Is it a new GSXR 750...???....

BUSA_STEVE · « **Reply #8 on:** February 19, 2006, 03:15:15 PM »

The new ZX-14

tnfastbusa · « **Reply #9 on:** February 19, 2006, 03:45:56 PM »

new r1 with mods or a zx 10 with mods

Yngve · « **Reply #10 on:** February 19, 2006, 04:42:26 PM »

Old GS1100 with 1327 and ported head.....

Revalot # 1 · « **Reply #11 on:** February 19, 2006, 04:52:41 PM »

04 GSXR 750 with a 40 shot of NOS.

FASBUS · « **Reply #12 on:** February 19, 2006, 04:55:35 PM »

zx-11

FASBUS · « **Reply #13 on:** February 19, 2006, 05:02:39 PM »

cams @ 105/105 175-180 jet sizes ZX9?

FASBUS · « **Reply #14 on:** February 19, 2006, 05:07:38 PM »

could be 01-03 gixx. 1k limiter would come in about 12,200 unless its a 6th gear pull.
Would need some xtra compression for 86ft. lbs. though & 166hp would be a little low for application
unless stock cams & head.

DarkFalcon · « **Reply #15 on:** February 19, 2006, 05:10:38 PM »

zx12 with slip-on, no pc and too little air in the tire. 02 black/gold. Torque is a little low though but spikes at 9k. Second geuss is big block zx 9.

Quijinn · « **Reply #16 on:** February 19, 2006, 05:16:31 PM »

Going to say a piped Busa with a extended ecu

and cams changed to move hp up. Ok thats its I win haha

yah right lol

Revalot # 1 · « **Reply #17 on:** February 19, 2006, 05:17:27 PM »

Last try, A GSXR 1100, thats had some Big Motor Work

pr111 · « **Reply #18 on:** February 19, 2006, 05:24:17 PM »

With that kind of torque it's gotta be around 1200cc. I'm inclined to agree with the ZX-12 choice.

Gixxer1300r · « **Reply #19 on:** February 19, 2006, 05:24:33 PM »

looks like a stock busa with pipe, air box mod and a filter.

kawaski zxr 1100 or 1200 with work

maybe a 1200 bandit.

Gixxer1300r · « **Reply #20 on:** February 19, 2006, 05:27:15 PM »

how about that new busa killer from BMW

or yamahas FJZ1300 with mods

a built 1100 black bird

TL1000 with a ton of work

FASBUS · « **Reply #21 on:** February 19, 2006, 05:30:36 PM »

were the hell does an fzr1000 rev to anyway?

THEMOTORHEAD · « **Reply #22 on:** February 19, 2006, 05:54:54 PM »

zzr1200

Wolf1397 · « **Reply #23 on:** February 19, 2006, 06:04:36 PM »

Suzuki GSXR 1100 89-92 bored to 1216 cc and ported head, cams etc.

Wolf

DaveO · « **Reply #24 on:** February 19, 2006, 06:09:01 PM »

Quote from: Kid Quick on February 19, 2006, 05:17:27 PM

Last try, A GSXR 1100, thats had some Big Motor Work

No the last one made 220rwhp on C16....340rwhp on NOS....

One of you is VERY close.........Which ONE??? I need CC's.....

Dave

browning · « **Reply #25 on:** February 19, 2006, 06:09:47 PM »

i know it's a 1955 vespa with a ghetto kit on it

DaveO · « **Reply #26 on:** February 19, 2006, 06:10:19 PM »

Quote from: Wolf1397 on February 19, 2006, 06:04:36 PM

Suzuki GSXR 1100 89-92 bored to 1216 cc and ported head, cams etc.

Wolf

Not enough torque.....

Dave

DaveO · « **Reply #27 on:** February 19, 2006, 06:15:50 PM »

Keep tryin Daniel....LOL

Dave

GoldenChild · « **Reply #28 on:** February 19, 2006, 06:18:24 PM »

zx9 with a 998 kit,cams and head work

GoldenChild · « **Reply #29 on:** February 19, 2006, 06:24:28 PM »

zx12 with 1270-1290 kit

DarkFalcon · « **Reply #30 on:** February 19, 2006, 06:31:42 PM »

If its the 9, then 998.

Kenn AL · « **Reply #31 on:** February 19, 2006, 06:35:03 PM »

FZR 1000 revs to 11,000

Revalot # 1 · « **Reply #32 on:** February 19, 2006, 09:46:07 PM »

Quote from: DaveO on February 19, 2006, 06:09:01 PM

Quote from: Kid Quick on February 19, 2006, 05:17:27 PM
Last try, A GSXR 1100, thats had some Big Motor Work

No the last one made 220rwhp on C16....340rwhp on NOS....

One of you is VERY close.........Which ONE??? I need CC's.....

Dave

Alright you talked me into it, This is a GSXR 1100(89-92), With the Big Pappa Kit 1340cc, BAM

FASBUS · « **Reply #33 on:** February 19, 2006, 09:49:30 PM »

988cc gixxer 1k or a more conservative 1040

FASBUS · « **Reply #34 on:** February 19, 2006, 09:53:14 PM »

Dayum Dave got me curious as hell..What is it?87ft lbs if its in high tune doesnt need many cc's.

busamagic · « **Reply #35 on:** February 19, 2006, 09:55:40 PM »

how about a bmw k1200S or a bmw k1200R

FASBUS · « **Reply #36 on:** February 19, 2006, 09:59:22 PM »

2mm over fzr1k

FASBUS · « **Reply #37 on:** February 19, 2006, 10:04:37 PM »

955cc zx9.....Dave I hope your laughing right now,This is like hearing a song playing in your head &
not being able to come up w/a title............LOL

bajabug · « **Reply #38 on:** February 19, 2006, 10:06:14 PM »

02 gsxr1000 with work

DaveO · « **Reply #39 on:** February 19, 2006, 10:07:58 PM »

Quote from: FASBUS on February 19, 2006, 09:59:22 PM

2mm over fzr1k

BINGO...WE HAVE A WINNER!!!!

1990 FZR1000...1070cc kit, 41 mm keihins, meg cams, ported head....

LMK when you send your ECM FASBUS.....

For the others...See my "No SPAM 2" thread on Gen Dis for another chance...

Dave

E-RACER · « **Reply #40 on:** February 19, 2006, 11:01:47 PM »

I wouldn't of guessed in a million years!!!!!

But sure could use a extended Ecm

..but I didnt tell anyone like promissed!!

Revalot # 1 · « **Reply #41 on:** February 20, 2006, 04:17:49 AM »

All Man! I had a fzr 1000 to, back in 93 brand new, And I have a issue of sport rider with Team Attack with that same kit.

DaveO · « **Reply #42 on:** February 20, 2006, 07:23:45 PM »

Quote from: Kid Quick on February 20, 2006, 04:17:49 AM

All Man! I had a fzr 1000 to, back in 93 brand new, And I have a issue of sport rider with Team Attack with that same kit.

Kid,

That engine had a Stanboli head(Attack)....Did a bit of work with him back then....Nice guy.

Dave

FASBUS · « **Reply #43 on:** February 27, 2006, 03:54:17 PM »

Quote from: DaveO on February 19, 2006, 10:07:58 PM

Quote from: FASBUS on February 19, 2006, 09:59:22 PM
2mm over fzr1k

BINGO...WE HAVE A WINNER!!!!

1990 FZR1000...1070cc kit, 41 mm keihins, meg cams, ported head....

LMK when you send your ECM FASBUS.....

For the others...See my "No SPAM 2" thread on Gen Dis for another chance...

Dave

Way cool Dave!!! Thanks for giving back to the site(members) , speaks volumes.

News:

Author Topic: Who can guess???? (Read 10920 times) Tweet

THEMOTORHEAD

GoldenChild

GoldenChild