Haybusa Parts and Service Member Support
« previous next »
Pages: [1] 2 3   Go Down

Author Topic: 600 swingarm  (Read 28458 times)

Offline Ramin

  • Rider
  • ***
  • Posts: 220
600 swingarm
« on: February 23, 2006, 05:11:06 PM »
will swingarm from suzuki 600 cc bolt on to busa?.and what year should i be looking for?.
thanks.
Logged

Offline Streaker00

  • Post Master
  • *****
  • Posts: 1546
  • Gender: Male
Re: 600 swingarm
« Reply #1 on: February 23, 2006, 06:14:21 PM »
Yes they fit. 01 - 03  is the arm of choice. You will need the pivit from the 600.
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
Re: 600 swingarm
« Reply #2 on: February 24, 2006, 04:42:03 PM »
i am lookig to turbocharge the busa.think that rear strong enough to hold the power.the busa swing arm looks so much beefier,i dont want it to snap while i am boosting at 100 mph.
thanks.
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
Re: 600 swingarm
« Reply #3 on: February 24, 2006, 06:19:48 PM »
i tried to install 2002 gixxer rear swingarm,it fits except i need different dogbone or something.
i used busa and gixxer dogbone and it wont work.
Logged

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: 600 swingarm
« Reply #4 on: February 24, 2006, 06:51:30 PM »
Quote from: Ramin on February 24, 2006, 06:19:48 PM
i tried to install 2002 gixxer rear swingarm,it fits except i need different dogbone or something.
i used busa and gixxer dogbone and it wont work.

Did you use the 600 shock knuckle?  If so the Busa dogbones should work just fine...
Logged

Offline Streaker00

  • Post Master
  • *****
  • Posts: 1546
  • Gender: Male
Re: 600 swingarm
« Reply #5 on: February 24, 2006, 09:25:23 PM »
Quote from: gnd111 on February 24, 2006, 06:51:30 PM
Quote from: Ramin on February 24, 2006, 06:19:48 PM
i tried to install 2002 gixxer rear swingarm,it fits except i need different dogbone or something.
i used busa and gixxer dogbone and it wont work.

Did you use the 600 shock knuckle?  If so the Busa dogbones should work just fine...
:thumb:
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
Re: 600 swingarm
« Reply #6 on: February 25, 2006, 04:46:29 PM »
i used gixxer swing arm with busa shock.then i used busa and gixxer dog bone(the rear swing arm is either to high or to low with this combo,so i dont know where to go from here.if i use the busa dog bone the rear swing arm touches the shock and i cant bolt it together.
Logged

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: 600 swingarm
« Reply #7 on: February 25, 2006, 05:15:52 PM »
You need - gixxer swingarm, busa shock, busa dogbones and gixxer knuckle (shock pivot (lower))...
Logged

Offline camaroguy72

  • Post Whore
  • ****
  • Posts: 556
  • Where am I?
Re: 600 swingarm
« Reply #8 on: February 27, 2006, 10:18:18 AM »
you guys are all wrong. I just did this mod and it DOES NOT work unless you want to a) grind down the swingarm or b) put lowering links on it. 

I put the gsxr 600 arm on there, and the shock pivot. The stock busa dog bones were too short  so i had to either get longer dogbones or grind something to make clearance. I

http://www.suzukihayabusa.org/forum/index.php?topic=66080.0
Logged

Offline E-RACER

  • Universal Post Whore
  • *******
  • Posts: 9408
Re: 600 swingarm
« Reply #9 on: February 27, 2006, 12:28:41 PM »
Most if not everyone who puts a 600 arm on wants it extended and lower. :D

Logged

Offline camaroguy72

  • Post Whore
  • ****
  • Posts: 556
  • Where am I?
Re: 600 swingarm
« Reply #10 on: February 27, 2006, 01:23:50 PM »
as in most people/// you mean everybody so far except me lol!
Logged

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: 600 swingarm
« Reply #11 on: February 27, 2006, 05:21:43 PM »
My mods list for an 02/03 600 arm worked fine for me with a Busa or G1K shock...
Logged

Offline camaroguy72

  • Post Whore
  • ****
  • Posts: 556
  • Where am I?
Re: 600 swingarm
« Reply #12 on: February 27, 2006, 05:48:44 PM »
was the bike lowered ? thats the only way it truly bolts right up
Logged

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: 600 swingarm
« Reply #13 on: February 27, 2006, 07:27:30 PM »
Quote from: camaroguy72 on February 27, 2006, 05:48:44 PM
was the bike lowered ? thats the only way it truly bolts right up

Yes - in either the middle or last hole of the 3 hole dogbones but it wasn't slammed..
Logged

Offline camaroguy72

  • Post Whore
  • ****
  • Posts: 556
  • Where am I?
Re: 600 swingarm
« Reply #14 on: February 27, 2006, 10:36:13 PM »
yea stock links dont work... thats where i was going with it.
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
Re: 600 swingarm
« Reply #15 on: March 21, 2006, 11:58:50 AM »
so is there anyway to use 600 750 or even 1000 swing arm on a busa,but i like it at the stock height.i wouldent mind if its 1 inch lowered.if i remmember the yoshimura hayabusa x1 uses 750 swing arm and is at stock height
 
Logged

Offline camaroguy72

  • Post Whore
  • ****
  • Posts: 556
  • Where am I?
Re: 600 swingarm
« Reply #16 on: March 21, 2006, 12:35:03 PM »
im not sure what happens if you put longer dogbones.. like where it would sit.  I had to grind down the inside of my swingarm to make it work. 
Logged

Offline camaroguy72

  • Post Whore
  • ****
  • Posts: 556
  • Where am I?
Re: 600 swingarm
« Reply #17 on: March 21, 2006, 12:36:02 PM »
oh yea if you want handling.. I rode my bike then a 06 LE... the LE was a freakin PIG compared to mine.. no joke! I think my bikes setup perfect for me and my riding style.  you can do the same thing I did im sure but with a turbo you would need a brace
Logged

Offline Ramin

  • Rider
  • ***
  • Posts: 220
Re: 600 swingarm
« Reply #18 on: March 23, 2006, 01:51:39 PM »
its not going to work with longer dog bones.cause i used my gixxers.the gixxer is at least 2 inch longer.
Logged

Offline camaroguy72

  • Post Whore
  • ****
  • Posts: 556
  • Where am I?
Re: 600 swingarm
« Reply #19 on: March 23, 2006, 02:16:32 PM »
yea you need the busa lowering links.. probably on the last hole. I ground down the inside of my swingarm to make clearance and have no issues... as where i ground it down is not a critical area.  are you going with an extended arm or stock length 600?
Logged

Offline hewcalvin

  • Apprentice Post Whore
  • **
  • Posts: 10
Re: 600 swingarm
« Reply #20 on: November 19, 2007, 06:41:26 AM »
just wanna know, if then the 2006  600 swingarm will fit too?
Logged

Offline SPARKY1397R

  • Universal Post Whore
  • *******
  • Posts: 7596
  • Gender: Male
Re: 600 swingarm
« Reply #21 on: November 19, 2007, 01:45:13 PM »
2001-2003
Logged

Offline Canadian Mike

  • Mad Post Whore
  • ******
  • Posts: 3528
Re: 600 swingarm
« Reply #22 on: November 19, 2007, 05:03:28 PM »
Quote from: hewcalvin on November 19, 2007, 06:41:26 AM
just wanna know, if then the 2006  600 swingarm will fit too?

NOPE
Logged

Offline 1vapors

  • Rider
  • ***
  • Posts: 298
Re: 600 swingarm
« Reply #23 on: December 05, 2007, 11:49:31 AM »
Will the busa extentions fit into a 600 swing arm
Logged

Offline Mospeada

  • Post Master
  • *****
  • Posts: 1785
  • Gender: Male
  • Representing San Diego's back roads. Woot!
Re: 600 swingarm
« Reply #24 on: December 05, 2007, 12:54:53 PM »
I've also heard the 600 swing arm was a lot lighter than the stock Busa swing arm. Is this true and about how much?
Logged
Take off like a 13, flick it like a 6
Pages: [1] 2 3   Go Up
« previous next »