Author Topic: Would like to know what works best? (Read 5911 times) Tweet

Dela-Busa92 · « **on:** April 06, 2006, 10:13:16 PM »

Probably a repeat ? But here goes........What is the best brand windscreen to purchase? Which undertail is best bang for the buck? Where is the best place to buy all things BUSA? I've tried a site on here but the page is under construction so I can't see anything before I buy. Other sites seem to cater to Turbo Busas: no disrespect......just not ready for all that.......YET!

TrickTom1 · « **Reply #1 on:** April 08, 2006, 08:35:01 AM »

Quote from: Dela-Busa92 on April 06, 2006, 10:13:16 PM

Probably a repeat ? But here goes........What is the best brand windscreen to purchase? Which undertail is best bang for the buck? Where is the best place to buy all things BUSA? I've tried a site on here but the page is under construction so I can't see anything before I buy. Other sites seem to cater to Turbo Busas: no disrespect......just not ready for all that.......YET!

Zero gravity double bubble windscreen, undertail depends on how low your bike is.

Bowman · « **Reply #2 on:** April 08, 2006, 11:49:42 AM »

Zero gravity is good but I like Sportec

Dela-Busa92 · « **Reply #3 on:** April 09, 2006, 07:05:56 AM »

As for the undertail, everything I've read says to go with dogbones ran at the middle hole in the rear...so if I do this mod....what undertail works best/looks best? Also, Is anyone using REAPER RISERS or is it best to get the top clamp?

Pinky · « **Reply #4 on:** April 09, 2006, 09:21:18 AM »

i like cut forks myself less bottoming out of parts on the bottom of the bike

Pinky · « **Reply #5 on:** April 09, 2006, 09:42:34 AM »

mty strap caused hard turning ive got cut forks now i love them

Bowman · « **Reply #6 on:** April 09, 2006, 10:19:33 AM »

Quote from: cdhoroho1300 on April 09, 2006, 09:21:18 AM

i like cut forks myself less bottoming out of parts on the bottom of the bike

+1

ZEUS · « **Reply #7 on:** April 14, 2006, 08:49:11 PM »

Quote from: Bowman on April 09, 2006, 10:19:33 AM

Quote from: cdhoroho1300 on April 09, 2006, 09:21:18 AM
i like cut forks myself less bottoming out of parts on the bottom of the bike

+1

+2

N.SANE · « **Reply #8 on:** September 05, 2006, 02:27:15 PM »

Windscreen = Puig
Undertail = Top Gun

frisbee · « **Reply #9 on:** September 05, 2006, 10:17:35 PM »

I have a Motorhead undertail Zero grav DB screen and 1" Reapers risers . Works and looks great ! I'd post a pic but I don't know how on this board . Got alot of pics of it on H org..

mercenary · « **Reply #10 on:** January 25, 2007, 08:21:35 AM »

i am currently using Power bronze windscreen,previously using zero gravity,but my mechanic broke the side while helping me to install my brembo brake pump.He said he only uses a bit of force,than the right side chip off.The power bronze is defintely thicker and clarity is the same.

Tybalt71 · « **Reply #11 on:** January 25, 2007, 10:19:09 AM »

windscreen= PUIG DB
undertail= MOTOTEK
Risers?, dont know why u would want those?

BBP1 Busa · « **Reply #12 on:** January 25, 2007, 01:14:14 PM »

Quote from: mercenary on January 25, 2007, 08:21:35 AM

i am currently using Power bronze windscreen,previously using zero gravity,but my mechanic broke the side while helping me to install my brembo brake pump.He said he only uses a bit of force,than the right side chip off.The power bronze is defintely thicker and clarity is the same.

Power bronze ............

Ksana · « **Reply #13 on:** January 25, 2007, 03:19:02 PM »

Quote from: Tybalt71 on January 25, 2007, 10:19:09 AM

windscreen= PUIG DB
undertail= MOTOTEK
Risers?, dont know why u would want those?

+1

and to lower the front end
mine is lowered 5mm in the front
for better handling in the curves
but I didn't use risers

eBusa · « **Reply #14 on:** January 30, 2007, 09:51:38 AM »

PUIG!!!

Outcast · « **Reply #15 on:** January 31, 2007, 06:35:48 PM »

I have Zero Gravity DB wich is great but i wish I had bought PUIG!!

grecco · « **Reply #16 on:** January 31, 2007, 09:20:59 PM »

zg and the motorhead undertail.

003busa · « **Reply #17 on:** February 02, 2007, 03:52:32 AM »

Zero gravity, Motorhead tail

grecco · « **Reply #18 on:** February 05, 2007, 09:56:17 PM »

damn thats nice.

EtrnlSoldier · « **Reply #19 on:** February 06, 2007, 02:49:01 AM »

Quote from: Dela-Busa92 on April 06, 2006, 10:13:16 PM

Probably a repeat ? But here goes........What is the best brand windscreen to purchase? Which undertail is best bang for the buck? Where is the best place to buy all things BUSA? I've tried a site on here but the page is under construction so I can't see anything before I buy. Other sites seem to cater to Turbo Busas: no disrespect......just not ready for all that.......YET!

Puig smoke or dark smoke depending on whether you want to see through it or not. I had the Zero Gravity first. Thin. In fact, so thin that you'll have to tape the front of it where it inserts into the bodywork to keep the damn thing from rattling. Puig is the way to go.

As far as undertail, it'll depend on which one you like the look of. My personal favorite is the Extreme Graphics Top Gun.

sambusa · « **Reply #20 on:** February 08, 2007, 09:54:18 PM »

Best look and great wind protection ( MagicalRacing)

EtrnlSoldier · « **Reply #21 on:** February 08, 2007, 11:54:50 PM »

Quote from: sambusa on February 08, 2007, 09:54:18 PM

Best look and great wind protection ( MagicalRacing)

That's cool. I'd like to see a picture of it mounted.

sambusa · « **Reply #22 on:** February 09, 2007, 11:24:14 AM »

EtrnlSoldier · « **Reply #23 on:** February 09, 2007, 11:26:07 AM »

Wow. I like it.

News:

Author Topic: Would like to know what works best? (Read 5911 times) Tweet