Author Topic: dry shot with air filter (Read 3414 times) Tweet

foresteronw · « **on:** March 29, 2006, 11:43:15 AM »

If I'm running a dry shot on my bike but want to keep the air filter in the bike where should I locate the nozzles? The nitrous will make it through the filter correct? I was going to put them on the ram air tubes but want to be sure.

Chuck Wilburn · « **Reply #1 on:** March 29, 2006, 11:52:01 AM »

Nitrous will go right through the filter no problem. Ram air tubes are perfect nozzle locations.

Rice Ya · « **Reply #2 on:** March 29, 2006, 07:10:33 PM »

You should run a BMC or a K&N filter. Use a fan spray nozzle (13500NOS is the part #).
The plate I made had about a 6 HP gain over the ram air tube install.
Nick Smith sells them now gixx1300r

bbqb4racin · « **Reply #3 on:** March 29, 2006, 11:23:53 PM »

My nozzles are in the ram air tubes. Stock air box, filter & stacks. Works fine, no problems.

SuperGrizz · « **Reply #4 on:** April 10, 2006, 12:26:49 AM »

Best place to put the nozzle is as close to the compressor outlet as possible

gsxrdan · « **Reply #5 on:** May 22, 2006, 01:13:33 PM »

I have been using 2 fan nozzles 1 in each tube for awhile.Plugs look great.

News:

Author Topic: dry shot with air filter (Read 3414 times) Tweet

foresteronw

dry shot with air filter

Chuck Wilburn

Re: dry shot with air filter

Rice Ya

Re: dry shot with air filter

bbqb4racin

Re: dry shot with air filter

SuperGrizz

Re: dry shot with air filter

gsxrdan

Re: dry shot with air filter