News:
ALL UNREAD TOPICS
Advertising info
Contact Us
Home
Help
Login
Register
SuzukiHayabusa.org
»
TECHNICAL
»
MODS
»
My No Drilling Alarm LED Placement
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: My No Drilling Alarm LED Placement (Read 1613 times)
Tweet
InfiniteReality
Rider
Posts: 344
Plate Reads: MY 420
My No Drilling Alarm LED Placement
«
on:
May 07, 2006, 04:50:36 PM »
I didn't want to drill in anything, so I decided to put the alarm light right at the front of the tank. That bolt is partially holding the wire down with 3M tape holding it from underneath. I also swapped out the blue LED that came with the Internatrix alarm for a white 13000mcd LED. It's brighter and matches the bike better.
I used Liquid Electrical Tape to seal the solder points, then tape and finally heat shrinked it to make sure moisture stays out.
Logged
2009 Charcoal/Silver Hayabusa
Lowered, 6+, Widened Stock Wheel, All LEDs, Everything Blacked Out
Print
Pages: [
1
]
Go Up
« previous
next »
SuzukiHayabusa.org
»
TECHNICAL
»
MODS
»
My No Drilling Alarm LED Placement