Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: Clutch w/mod ???'s  (Read 2949 times)

Offline ninjafreek

  • Rider
  • ***
  • Posts: 228
Clutch w/mod ???'s
« on: May 14, 2006, 09:34:35 AM »
I have 1397 brocks cushion,set-up stack height is 1.98in have the slave support also. Can't stop the bike from creeping when staging.
I have 4 heavy springs,and 2 super heavy duty from him. Man it's stiff!

Can I take those 2 super stiff springs out and replace them with 2 of the others? Anyone trying this?

Scared to take stack height away. For slippage on the big end.
Logged

Offline LaRedd

  • Rider
  • ***
  • Posts: 471
  • Gender: Male
Re: Clutch w/mod ???'s
« Reply #1 on: May 14, 2006, 11:07:06 AM »
So are you saying that the bike is still moving when you have the clutch pulled in?  If so something isn't quite right, you better recheck your stacking and make sure you have them in the right order.  Also make sure that you locked in the last steel.
Logged

Offline Quijinn

  • Universal Post Whore
  • *******
  • Posts: 7108
  • Gender: Male
  • Kawasaki Hahahahahah
Re: Clutch w/mod ???'s
« Reply #2 on: May 14, 2006, 11:26:51 AM »
Have you bleed the clutch? Might be air in there and its not pushing fully.
Logged
Hi my name is Mark and I am a Bikeaholic.     Be carefull how fast you race through life, the finish line is death, and the trophy is a headstone.  Our perspective is how we judge our lives, to judge others we need a little change in our perspective.

Offline ninjafreek

  • Rider
  • ***
  • Posts: 228
Re: Clutch w/mod ???'s
« Reply #3 on: May 14, 2006, 03:21:38 PM »
Yea that's what I'm saying,I have bleed it several times,
What do you mean by locking in the last steel? I have billet outer hub.
Logged

Offline ny05busa

  • Post Whore
  • ****
  • Posts: 764
Re: Clutch w/mod ???'s
« Reply #4 on: May 14, 2006, 04:13:44 PM »
The last fiber is actually in another groove than the others.
Logged
Bought 04/21/05 silver n blue busa. TI force, 16/42 , chrome lowereing clamp, lowering links, speedoheeler, double bubble, bar ends, fairing screens, tobin seats with pad, GANN arm, chrome carrezzios, carpenter 1397,vortec rearsets, mps nos, air shifter

Offline Quijinn

  • Universal Post Whore
  • *******
  • Posts: 7108
  • Gender: Male
  • Kawasaki Hahahahahah
Re: Clutch w/mod ???'s
« Reply #5 on: May 14, 2006, 07:07:11 PM »
Yah last fiber is overset like 25* or so sits in a seperate grove.
Logged
Hi my name is Mark and I am a Bikeaholic.     Be carefull how fast you race through life, the finish line is death, and the trophy is a headstone.  Our perspective is how we judge our lives, to judge others we need a little change in our perspective.

Offline Freddies Here

  • Rider
  • ***
  • Posts: 283
Re: Clutch w/mod ???'s
« Reply #6 on: May 19, 2006, 06:25:04 AM »
Sounds like your steel plates are warped. Or not all facing the same way.........Freddie
Logged

Offline n2busa

  • Rider
  • ***
  • Posts: 29
  • Where am I?
Re: Clutch w/mod ???'s
« Reply #7 on: May 25, 2006, 08:57:43 AM »
Well guys I got it working a hell of a lot better this weekend. Pulled a  thick steel, replace with thin, and it still crept.
I removed those 2 super heavy duty springs that Brock has in his kit. And this worked.
1:42-1:45 8 of 11 passes. :P
Logged
Pages: [1]   Go Up
« previous next »