Author Topic: Re: Motor mods and their Dyno Horsepower (Read 2444 times) Tweet

tampated · « **on:** May 22, 2006, 06:31:06 PM »

Should be around 185 with the short stacks and full pipe (with all the other mods...assuming around 13:1 compression)

Chet · « **Reply #1 on:** May 22, 2006, 07:00:05 PM »

I'd suggest you get a PC USB and have a dyno session to get the best results with what you already have.

Short stacks (stock or especially billet) will work best if you have a power commander to properly tune them.

Chet

Kiwi · « **Reply #2 on:** May 22, 2006, 10:03:50 PM »

Definitely get the PC USB next. You'll get a bit more power and most of all you can get the A/F right. With mods similar to what you are going to do I was having to add about 15% more fuel at the top end.

crazyspeed · « **Reply #3 on:** May 25, 2006, 10:39:49 PM »

Not sure about hp, but my seems 12 makes more power

until we meet again

News:

Author Topic: Re: Motor mods and their Dyno Horsepower (Read 2444 times) Tweet