Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: 06 Busa dry kit problems..HELP!  (Read 4499 times)

Offline fastlif

  • Rider
  • ***
  • Posts: 196
06 Busa dry kit problems..HELP!
« on: July 12, 2006, 07:06:47 PM »
06 busa dry kit-pretty standard(Brock mods)  36 jet in center of airbox, no filter, stainless lines, bottle in hump.  It sprays good, fogs box when sitting still-all seems great.  At track or on the road I get NOTHING.  no ET, NO mph NO seat of pants improvement.  I have changed lines, solenoids, nozzles, jets, bottles.  I have made a short curved siphon tube (just in case) NO HELP(did not need this on my 01).  I had this exact same set-up on an 01 busa that ran great.  For some reason this one gets nothing.

Does n20 go bad?  The bottle has been sitting up for 6 months(75# bottle) I fill my own.

any ideas?  ANYTHING??????????????

I have an appointment for dyno tomm(7/13) and would like to fix problems before I go.
Logged
myspace.com/fastlif

Offline Quijinn

  • Universal Post Whore
  • *******
  • Posts: 7108
  • Gender: Male
  • Kawasaki Hahahahahah
Re: 06 Busa dry kit problems..HELP!
« Reply #1 on: July 12, 2006, 08:07:29 PM »
Hmm it sprays when sitting but no moveing, how is the siphon tube set up? Maybe not enough bottle preassure?
Logged
Hi my name is Mark and I am a Bikeaholic.     Be carefull how fast you race through life, the finish line is death, and the trophy is a headstone.  Our perspective is how we judge our lives, to judge others we need a little change in our perspective.

Offline fastlif

  • Rider
  • ***
  • Posts: 196
Re: 06 Busa dry kit problems..HELP!
« Reply #2 on: July 12, 2006, 08:28:48 PM »
well it may or may not be spraying moving-it definately sprays when still and I can hear it.  Bottle pressure minimum 900 max 1000.  No siphon tube untill a day or so ago....I made a short curved one like pictured in another thread on here just to see if it helped.  I did not have a siphon on old bike with no problems but I'm running out of ideas.
Logged
myspace.com/fastlif

Offline busamagic

  • Mad Post Whore
  • ******
  • Posts: 3337
  • Gender: Male
Re: 06 Busa dry kit problems..HELP!
« Reply #3 on: July 13, 2006, 05:49:52 AM »
are you sure you have nitrous and not just built up air?
Logged
Cruising on a Harley


Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: 06 Busa dry kit problems..HELP!
« Reply #4 on: July 14, 2006, 05:14:51 AM »
Put bottle in hump upside down and remove syphon tube...
Logged

Offline GeorgeC

  • Mad Post Whore
  • ******
  • Posts: 4985
  • Gender: Male
  • It sucks to be slow...
Re: 06 Busa dry kit problems..HELP!
« Reply #5 on: July 20, 2006, 03:45:42 PM »
I was having a similar problem with the bottle mounted in the hump (where it used to work fine).  I said "fuck it" and had an aluminum mount welded to the swingarm in front of the tire, bottle upside down, no siphon tube.  Works like a champ now.  8)
Logged

Offline Zmydust

  • Post Master
  • *****
  • Posts: 1592
Re: 06 Busa dry kit problems..HELP!
« Reply #6 on: July 26, 2006, 09:48:41 PM »
Quote from: gnd111 on July 14, 2006, 05:14:51 AM
Put bottle in hump upside down and remove syphon tube...


That's how it is setup.
Logged
8.74 @166  9 PSI
Pages: [1]   Go Up
« previous next »