Author Topic: Ceramic bearing (Read 4362 times) Tweet

13 · « **on:** October 22, 2006, 09:08:17 PM »

DO you have to run them in both wheels or can you just run them in the rear wheel

Treysbusa · « **Reply #1 on:** October 22, 2006, 09:10:56 PM »

huh..............?

13 · « **Reply #2 on:** October 22, 2006, 09:18:35 PM »

what do you mean HUH

....read the title to the post Trey

Treysbusa · « **Reply #3 on:** October 22, 2006, 09:26:49 PM »

Ok, of course u can run them in 1 wheel but why not put them in both.

13 · « **Reply #4 on:** October 22, 2006, 09:30:23 PM »

i will pay for one if you will pay for the other..............

He told me last night he only runs them in the rear wheel

13 · « **Reply #5 on:** October 22, 2006, 09:32:42 PM »

wonder if timken makes ceramic bearings............

Bonedust · « **Reply #6 on:** October 22, 2006, 10:32:49 PM »

yes, they do...but ive had no luck getting x-ref numbers to buy them.

13 · « **Reply #7 on:** October 22, 2006, 10:48:39 PM »

HMM i have a hook up...........Friend of mine worked for a comapny that autonated one of ther plants so tehy get bearings for free

BOOSTED · « **Reply #8 on:** October 23, 2006, 08:19:31 AM »

If you get them for free why not get for both?

Treysbusa · « **Reply #9 on:** October 23, 2006, 08:26:28 AM »

Quote from: Kingpin on October 22, 2006, 10:48:39 PM

HMM i have a hook up...........Friend of mine worked for a comapny that autonated one of ther plants so tehy get bearings for free

i will pay for one if you will pay for the other..............

If u can get them there i will help u pay for them.

gnd111 · « **Reply #10 on:** October 23, 2006, 11:42:54 AM »

Kingpin - Nov 11th - Valdosta. See you there...

13 · « **Reply #11 on:** October 23, 2006, 11:59:08 AM »

GND what time does it open and start, i work ever saturday

13 · « **Reply #12 on:** October 23, 2006, 12:00:01 PM »

Hope i can get them for free, if not real cheap.......................gotta
call in the sizes

Mospeada · « **Reply #13 on:** October 23, 2006, 09:35:26 PM »

For crying out loud, just get them both. Yeah the rr wheel does benefit more, but it's the little things that add up. I've got them and they are worth the money to me.

If the bike feels like it's lost 50 lbs just pushing it around the garage, you can imagine the friction difference when you're doing well over a 100.

busa_tom · « **Reply #14 on:** October 23, 2006, 10:35:18 PM »

When it gets to this level, it truely is the little things that separate the boys from the men, go for both ends.

13 · « **Reply #15 on:** October 23, 2006, 11:53:31 PM »

i was told that as long as you keep the ceramic dust blown out of the bearng tha tit will lastlinger. that the dust is what tears up the balls....any turth

turbo1320 · « **Reply #16 on:** October 24, 2006, 03:03:56 AM »

I have them on the cams,Wheels and the Transmission and when tested on the Dyno on a stock BUSA it only made 2.7HP

I did not do a before and after test with the Bearings in the motor But let me say this you will need Better Brakes so Hp isnt every thing
When you let off the Gas the Bike just wants to keep going,Burt

Stedman · « **Reply #17 on:** October 24, 2006, 07:37:37 AM »

Buy Both... front and rear you will see Money well spent...

Bonedust · « **Reply #18 on:** October 24, 2006, 02:30:09 PM »

Quote from: Stedman on October 24, 2006, 07:37:37 AM

Buy Both... front and rear you will see Money well spent...

Stedman, do you have access to get ceramic bearings? for BST's?

Treysbusa · « **Reply #19 on:** October 24, 2006, 07:39:28 PM »

Quote from: busa_tom on October 23, 2006, 10:35:18 PM

When it gets to this level, it truely is the little things that separate the boys from the men, go for both ends.

I guess i better get a set.

Stedman · « **Reply #20 on:** October 25, 2006, 08:00:49 AM »

I think $400.00 is retail...

13 · « **Reply #21 on:** October 25, 2006, 08:59:33 AM »

Nobody wants to pay retail...........................lol

gnd111 · « **Reply #22 on:** October 25, 2006, 09:41:36 AM »

I don't think GeorgeC saw any more mph on his bike from ceramic bearings. But they do free up movement so they can't be bad...

News:

Author Topic: Ceramic bearing (Read 4362 times) Tweet