Haybusa Parts and Service Member Support

Author Topic: carpenter packages  (Read 32013 times)

Offline tank

  • New User!
  • *
  • Posts: 4
carpenter packages
« on: November 27, 2006, 08:42:13 PM »
Can anyone tell me about the capenter packages for the hayabusa i was thinking about going with the 3100 dollar packaged it says on the webpage that i can  get 210hp on factory pistons. Has anyone had any work done by them

Offline busamagic

  • Mad Post Whore
  • ******
  • Posts: 3337
  • Gender: Male
Re: carpenter packages
« Reply #1 on: November 27, 2006, 09:08:24 PM »
carpenter does good work and is a very reputable company.
Cruising on a Harley



Offline Ct Chip

  • Rider
  • ***
  • Posts: 39
Re: carpenter packages
« Reply #2 on: November 27, 2006, 09:31:08 PM »
I had his 200 HP stock piston kit done to my '02 in October.

Offline AIRTIME MOTORSPORTS

  • Rider
  • ***
  • Posts: 259
Re: carpenter packages
« Reply #3 on: November 27, 2006, 10:04:55 PM »
he is the best there is!!!!
BRING IT

Offline spencer99

  • Rider
  • ***
  • Posts: 87
Re: carpenter packages
« Reply #4 on: November 28, 2006, 09:28:30 PM »
i have the 1397 kit from him and mine wont run for shit 143 60 5.928 1/8 120mph i weigh 180 ?????

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: carpenter packages
« Reply #5 on: November 29, 2006, 08:19:16 AM »
i have the 1397 kit from him and mine wont run for shit 143 60 5.928 1/8 120mph i weigh 180 ?????


Just take to a good tuner.  You will find some mph and et i bet...

Offline Ct Chip

  • Rider
  • ***
  • Posts: 39
Re: carpenter packages
« Reply #6 on: November 29, 2006, 08:48:09 AM »
i have the 1397 kit from him and mine wont run for shit 143 60 5.928 1/8 120mph i weigh 180 ?????

He throws an awful lot of fuel at them all the way through the rpm range and only does his pulls from 7k to the rev limiter. Mine was way rich from idle on up but pretty close from 7k to the limiter. Get it custom mapped on a DJ 250i. You will be amazed at the difference. I was.
Keep us posted & good luck.
Chip

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: carpenter packages
« Reply #7 on: November 29, 2006, 09:05:49 AM »
Or even try a generic Brock map - they work good in alot of stuff... :thumb:

Offline Badbusa@work

  • Post Whore
  • ****
  • Posts: 572
  • Gender: Male
Re: carpenter packages
« Reply #8 on: November 29, 2006, 10:16:54 AM »
i have the 1397 kit from him and mine wont run for shit 143 60 5.928 1/8 120mph i weigh 180 ?????

JUST GET IT TUNED
FL BOYS

Offline spencer99

  • Rider
  • ***
  • Posts: 87
Re: carpenter packages
« Reply #9 on: November 29, 2006, 04:30:23 PM »
thank u

Offline schrader13

  • Mad Post Whore
  • ******
  • Posts: 2014
  • Gender: Male
Re: carpenter packages
« Reply #10 on: November 29, 2006, 04:31:27 PM »
i had a 1430 done by bob and i was not inpressed at all. i left his shop with dyno sheets and went to my local dyno and they were 29hp off??? took it back and he said it was fine. i know 2 other people that have his 1397 kits and there a joke also??? were gonna dyno tune spencer99 bike but for 4500.00 it should come tuned!!all and all i went turbo to solve my prob on hp!!
2005 500hp + turbo busa
2000 nos busa
2003 texas chopper
67 big block blown big tire camaro
98 c5 corvette
nasty 686 raptor

Offline Ct Chip

  • Rider
  • ***
  • Posts: 39
Re: carpenter packages
« Reply #11 on: November 29, 2006, 05:23:14 PM »
i had a 1430 done by bob and i was not inpressed at all. i left his shop with dyno sheets and went to my local dyno and they were 29hp off??? took it back and he said it was fine. i know 2 other people that have his 1397 kits and there a joke also??? were gonna dyno tune spencer99 bike but for 4500.00 it should come tuned!!all and all i went turbo to solve my prob on hp!!
schrader13
Just curious, what did it make at the rear wheel on the other dyno??
Chip

Offline schrader13

  • Mad Post Whore
  • ******
  • Posts: 2014
  • Gender: Male
Re: carpenter packages
« Reply #12 on: November 30, 2006, 06:47:15 AM »
sent pm for your answer!
2005 500hp + turbo busa
2000 nos busa
2003 texas chopper
67 big block blown big tire camaro
98 c5 corvette
nasty 686 raptor

Offline Steve Jester

  • Rider
  • ***
  • Posts: 458
Re: carpenter packages
« Reply #13 on: November 30, 2006, 08:44:52 PM »
i have the 1397 kit from him and mine wont run for shit 143 60 5.928 1/8 120mph i weigh 180 ?????

set the up the bike and ride that will help
CARPENTER RACE ENGINES
NLR TURBOS
AMS 1000

Offline schrader13

  • Mad Post Whore
  • ******
  • Posts: 2014
  • Gender: Male
Re: carpenter packages
« Reply #14 on: December 01, 2006, 06:50:05 AM »
we did put a rider on spencers bike and it went no better?????
« Last Edit: December 01, 2006, 06:51:50 AM by schrader13 »
2005 500hp + turbo busa
2000 nos busa
2003 texas chopper
67 big block blown big tire camaro
98 c5 corvette
nasty 686 raptor

Offline spencer99

  • Rider
  • ***
  • Posts: 87
Re: carpenter packages
« Reply #15 on: December 01, 2006, 01:03:09 PM »

 set the up the bike and ride that will help  haha like to see u i bet it sill wont mph

Offline sm2w

  • Rider
  • ***
  • Posts: 209
Re: carpenter packages
« Reply #16 on: December 01, 2006, 04:50:29 PM »
It will with Steve riding it

Offline schrader13

  • Mad Post Whore
  • ******
  • Posts: 2014
  • Gender: Male
Re: carpenter packages
« Reply #17 on: December 01, 2006, 04:52:30 PM »
if it was what it was supose to be it would wit hspencer on it also!
2005 500hp + turbo busa
2000 nos busa
2003 texas chopper
67 big block blown big tire camaro
98 c5 corvette
nasty 686 raptor

Offline sm2w

  • Rider
  • ***
  • Posts: 209
Re: carpenter packages
« Reply #18 on: December 01, 2006, 08:21:27 PM »
All I am saying is that Steve is a bad ass rider that is all

Offline badassblackbusa

  • Post Master
  • *****
  • Posts: 1204
Re: carpenter packages
« Reply #19 on: December 01, 2006, 11:43:27 PM »
why did you have to send a pm about the hp that it made. if its a problem put it all out here. what did bob tell you it made. what did your dyno make. what times did it run.
and to saint peter i will tell another solider reporting sir ive served my time in hell..

Offline soNso

  • Post Whore
  • ****
  • Posts: 617
Re: carpenter packages
« Reply #20 on: December 02, 2006, 01:03:50 AM »
why did you have to send a pm about the hp that it made. if its a problem put it all out here. what did bob tell you it made. what did your dyno make. what times did it run.
[/quote ] I'm interested to...thinking about going turbo, but i thought bob makes good power w/1397 motor.

Offline schrader13

  • Mad Post Whore
  • ******
  • Posts: 2014
  • Gender: Male
Re: carpenter packages
« Reply #21 on: December 02, 2006, 05:05:57 AM »
i sent a pm because its not my motor any more and the new owner might not want that stuff posted!if i still had it i would.we have a bud in nc that did a 1397 in his basement and it out runs bot hthe 1397s bob did for us. and he has 1/2 the money in it,shit his 1397  13 1/2 :1 made more than my 1430 14:1 did????and im getting alot of pm's saying the same thing!!! this is only what a few of us think! i have seen and know a few of bob's motors that hall a$$ im just saying we did not get any of those!
2005 500hp + turbo busa
2000 nos busa
2003 texas chopper
67 big block blown big tire camaro
98 c5 corvette
nasty 686 raptor

Offline badassblackbusa

  • Post Master
  • *****
  • Posts: 1204
Re: carpenter packages
« Reply #22 on: December 02, 2006, 08:34:16 AM »
yea i understand that. all the ones ive seen have ran good but then again yall might have gotten a monday motor.  :lol: thanks for explaining.
and to saint peter i will tell another solider reporting sir ive served my time in hell..

Offline schrader13

  • Mad Post Whore
  • ******
  • Posts: 2014
  • Gender: Male
Re: carpenter packages
« Reply #23 on: December 02, 2006, 02:43:05 PM »
well guys i just got home from the tuner having the turbo motor tuned! and the man told me the map that was in there(from bob) he said (looks like a 3yr old did this) he said it had a s line of 5s line of 7s he said it was a joke. so i guess its to bad i never had it dyno tuned. i thought bob did that! my bad for thinking!!
2005 500hp + turbo busa
2000 nos busa
2003 texas chopper
67 big block blown big tire camaro
98 c5 corvette
nasty 686 raptor

Offline gnd111

  • Post Apocalyptic Whore
  • ********
  • Posts: 12410
  • Fried Chicken and Gasoline...
Re: carpenter packages
« Reply #24 on: December 02, 2006, 06:36:43 PM »
If someone goes a 1.43 on a stock clutch that is pretty good as long as they are no more than 66".   What are the specifics on the bike?
« Last Edit: December 03, 2006, 02:10:00 PM by gnd111 »