Cycle-Tek / Boostbysmith 2 Step Rev-Limiter [4 Units in Stock as of 4-30-07]

[smithabusa]

AS OF 4-30-2007 WE HAVE 4 UNITS IN STOCK NEEDING GOOD HOMES, ALL AVAILABLE WITH AUTO-SHIFT OUTPUT.




Cycle-Tek & BoostBySmith are pleased to introduce a new 2-Step Rev-Limiter.  We would like to get an idea of how many we should start building.

** I have added the 2 step to my webpage (www.boostbysmith.com) with buy it now buttons for purchase **
Introductory Pricing:  $195.00 + Shipping
Optional LED Shift Light with Bracket:  $15.00
     LED Colors:  Red, Blue, orange, Green
                   
To guarantee introductory pricing, we can accept full payment now, item will ship by the end of January.  Once we are in full production, pricing may need to be adjusted.

Video Demonstration on my Turbo Hayabusa
www.boostbysmith.com/Videos/2stepgreg1.wmv

Unit comes complete with wire harness, scotch lock and easy crimp connectors to make installation very easy and straight-forward.  Detailed directions will be supplied on CD with illustrations.

Both Launch and Shift Light RPM are adjustable from 3,000 RPM - 15,700 RPM in 100 RPM increments using easy to use dip switches and push buttons.  (500 RPM - 12000 RPM setting is also available if needed).

Actual Enclosure Dimensions:  2.75" x 1.84" x .96"

[Pinky]

do you have a cost yet?

[smithabusa]

do you have a cost yet?

We don't have that pinned down yet, but like all of my and Matt's stuff it will be very affordable to the average guy.

[Pinky]

well id like one when you get the price set
and let me know
and i might get a shift light and multi stage boost before the spring
if i dont go broke
i need one for my nonpayin attention launches lol
hit me up when you know ok greg

chris

[smithabusa]

well id like one when you get the price set
and let me know
and i might get a shift light and multi stage boost before the spring
if i dont go broke
i need one for my nonpayin attention launches lol
hit me up when you know ok greg

chris

Chris, we are probably going to have a shift light come standard with the 2 step by the way

[Pinky]

sweet
you guys are the best

[smithabusa]

Within the next day or two Matt and I should have some product photos along with pricing etc.

Greg

[busa107]

Can this be ran witha hand clutch???? Or would if have to be a Multi-Stage or Slider?

[TrickTom1]

Within the next day or two Matt and I should have some product photos along with pricing etc.

Greg

[Kurt]

Can this be ran witha hand clutch???? Or would if have to be a Multi-Stage or Slider?

It can be used with stock clutch

[smithabusa]

it could be used with either, if used with a slider probably just use a button to hold it on 2 step, main focus is to use them with a hand clutch.

[smithabusa]

See 1st post for updated photos and pricing information.

[05turbo1000]

that is awsome i will get with you next day or so im fixing to have to go to work if not i will get with you tomorrow. thanks Jason

[smithabusa]

that is awsome i will get with you next day or so im fixing to have to go to work if not i will get with you tomorrow. thanks Jason

Cool Jason, take 'er easy

[smithabusa]

** I have added the 2 step to my webpage (www.boostbysmith.com) with buy it now buttons for purchase **

[DonnieF]

Does this 2 step have a closed negative lead when engaged like the MSD , to hook to a WOT switch?

           Thanks Donnie

[smithabusa]

Does this 2 step have a closed negative lead when engaged like the MSD , to hook to a WOT switch?

           Thanks Donnie

I am not 100% sure what you are asking, what do you hook it to the WOT switch for?

[DonnieF]

Smith
When running nitrous on a wide open throttle switch. On the MSD 2 steps on cars ... there is a closed negative circuit when engaged. You run the closed negative to the negative lead on the WOT switch .... When you push the button the 2 step comes on , negative closes and WOT switch doesnt have a ground , release the button and the negative opens and WOT switch is armed. Just trying to figure out how to run this 2 step with a WOT switch.

[smithabusa]

Smith
When running nitrous on a wide open throttle switch. On the MSD 2 steps on cars ... there is a closed negative circuit when engaged. You run the closed negative to the negative lead on the WOT switch .... When you push the button the 2 step comes on , negative closes and WOT switch doesnt have a ground , release the button and the negative opens and WOT switch is armed. Just trying to figure out how to run this 2 step with a WOT switch.

It wouldn't be hard at all to wire in a relay to NOT let the WOT switch work when the clutch is pulled in.

[YAG]

Will this unit have a shift kill built in?  I am interested in getting one if it does.

[smithabusa]

Will this unit have a shift kill built in?  I am interested in getting one if it does.

Sorry Yag it's a 2 step / shif tlight controller only, no kill box built in for air shifter, but Matt does make a hella nice kill box that could go with it.

[EXTREMEFUN1300]

2-Steps are in production and the first 5 units are shipping tomorrow, 1/29!  Greg and I want to thank everyone for their patience and support!  Special thanks go out to Kurt for letting us molest your bike to run the early tests on a N/A bike, thanks bro! 

[Kurt]

  No problem Matt

[TrickTom1]

  NICE STUFF GUYS! 

[smithabusa]

Glad you like it

Greg