Haybusa Parts and Service Member Support
« previous next »
Pages: [1]   Go Down

Author Topic: 2 stage N20 set-up....?  (Read 4411 times)

BLACK051K

  • Guest
2 stage N20 set-up....?
« on: January 24, 2007, 04:56:06 PM »
Need some info on proper 2 stage N20 set.... up...wiring,redundant selenoid,pics,etc would be helpfull... just curious on used applications.
1st Stage by WOT then 2nd stage would  be activated by button
No progressive controller just,2 seperate selenoids with progressively bigger Jets activated at progressively higher RPM's .

1st stage(selenoid) would go OFF via... Relay,tripped by 2nd stage(selenoid).
   
 
 
 
« Last Edit: January 24, 2007, 06:51:43 PM by BLACK051K »
Logged

Offline Chuck Wilburn

  • Post Whore
  • ****
  • Posts: 726
    • http://www.tupeloperformancecycles.com
Re: 2 stage N20 set-up....?
« Reply #1 on: January 24, 2007, 06:25:51 PM »
Much easier to do a big-jet wet shot and progressor.  Or, a wet shot on a progressor and a dry shot with the button for the second stage.
Logged

Offline Hybrid

  • Post Whore
  • ****
  • Posts: 740
Re: 2 stage N20 set-up....?
« Reply #2 on: January 24, 2007, 08:09:56 PM »
Logged

BLACK051K

  • Guest
Re: 2 stage N20 set-up....?
« Reply #3 on: January 24, 2007, 08:38:21 PM »
Yeah I did,wanted to get some feed back on the best way to do.

But Ive figured it out....I'll be using/mounting a second fogger in left intake tube.
Save some $$ and use extra selenoids,lines foggers,etc i have laying around.
Start off small shot in first and after second gear can switch to a bigger shot,lets say after 60'mark - half track if wanted to.

« Last Edit: January 25, 2007, 10:14:02 PM by BLACK051K »
Logged

Offline Hybrid

  • Post Whore
  • ****
  • Posts: 740
Re: 2 stage N20 set-up....?
« Reply #4 on: January 28, 2007, 01:20:31 PM »
Are you going to activate the 2nd stage with your horn button?
Logged

BLACK051K

  • Guest
Re: 2 stage N20 set-up....?
« Reply #5 on: January 28, 2007, 10:05:56 PM »
Quote from: Hybrid on January 28, 2007, 01:20:31 PM
Are you going to activate the 2nd stage with your horn button?

This Button....Horn button is for Airshifter

« Last Edit: January 28, 2007, 10:09:08 PM by BLACK051K »
Logged

Offline Hybrid

  • Post Whore
  • ****
  • Posts: 740
Re: 2 stage N20 set-up....?
« Reply #6 on: January 28, 2007, 11:15:19 PM »
I guess you will use your autoshift function to control the shifter while you press the 2nd stage of nitrous? Nice setup. What kind of button is that? I used to have a Holeshot one that kinda looked like that but it broke on me. :(
Logged

BLACK051K

  • Guest
Re: 2 stage N20 set-up....?
« Reply #7 on: January 28, 2007, 11:37:46 PM »
Quote from: Hybrid on January 28, 2007, 11:15:19 PM
I guess you will use your autoshift function to control the shifter while you press the 2nd stage of nitrous? Nice setup. What kind of button is that? I used to have a Holeshot one that kinda looked like that but it broke on me. :(


Yes on 1st ? and its a Powercommander shift button.
Logged

Offline Hybrid

  • Post Whore
  • ****
  • Posts: 740
Re: 2 stage N20 set-up....?
« Reply #8 on: January 28, 2007, 11:46:19 PM »
Quote from: BLACK051K on January 28, 2007, 11:37:46 PM
Quote from: Hybrid on January 28, 2007, 11:15:19 PM
I guess you will use your autoshift function to control the shifter while you press the 2nd stage of nitrous? Nice setup. What kind of button is that? I used to have a Holeshot one that kinda looked like that but it broke on me. :(


Yes on 1st ? and its a Powercommander shift button.

I thought it looked like that.
Logged
Pages: [1]   Go Up
« previous next »