SuzukiHayabusa.org
MEMBERS => MEMBER PROJECTS => Topic started by: slavatokar on February 03, 2015, 02:28:56 PM
-
Hi all, here some pictures of my build, sorry for quality, i use my phone to take pictures, sorry for bad english too... I start with MTC big block, old sleeves going to trash bin, i make new sleeves, and block been bored.
(http://images.vfl.ru/ii/1422994329/7b5c1e54/7676602_m.jpg) (http://vfl.ru/fotos/7b5c1e547676602.html)
-
(http://images.vfl.ru/ii/1422993528/db4ed342/7676417_m.jpg) (http://vfl.ru/fotos/db4ed3427676417.html)
(http://images.vfl.ru/ii/1422993528/0eec9cc6/7676418_m.jpg) (http://vfl.ru/fotos/0eec9cc67676418.html)
-
MTC pistons, lightened, and circlip grooves added.
(http://images.vfl.ru/ii/1422994201/364b5ee5/7676585_m.jpg) (http://vfl.ru/fotos/364b5ee57676585.html)
(http://images.vfl.ru/ii/1422994329/a12d0abf/7676603_m.jpg) (http://vfl.ru/fotos/a12d0abf7676603.html)
Cutting large pockets, for a bigger valves.
(http://images.vfl.ru/ii/1422994200/f213958e/7676584_m.jpg) (http://vfl.ru/fotos/f213958e7676584.html)
-
I make new bigger seats, to suit APE stainless valves.
(http://images.vfl.ru/ii/1422993204/cb9a2728/7676284_m.jpg) (http://vfl.ru/fotos/cb9a27287676284.html)
Seats installed, i replace guides too, (APE bronze guides)
(http://images.vfl.ru/ii/1422993204/4847304e/7676285_m.jpg) (http://vfl.ru/fotos/4847304e7676285.html)
(http://images.vfl.ru/ii/1422993869/da719538/7676492_m.jpg) (http://vfl.ru/fotos/da7195387676492.html)
(http://images.vfl.ru/ii/1422993528/87312d0a/7676415_m.jpg) (http://vfl.ru/fotos/87312d0a7676415.html)
-
(http://images.vfl.ru/ii/1422993204/e0c76027/7676286_m.jpg) (http://vfl.ru/fotos/e0c760277676286.html)
(http://images.vfl.ru/ii/1422993869/b82e09d8/7676494_m.jpg) (http://vfl.ru/fotos/b82e09d87676494.html)
I make titanium retainers
(http://images.vfl.ru/ii/1422993204/ea962b74/7676288_m.jpg) (http://vfl.ru/fotos/ea962b747676288.html)
New camchain, and APE valve springs.
(http://images.vfl.ru/ii/1422994200/593ce6d7/7676583_m.jpg) (http://vfl.ru/fotos/593ce6d77676583.html)
(http://images.vfl.ru/ii/1423501823/09e96094/7735201_m.jpg) (http://vfl.ru/fotos/09e960947735201.html)
-
Overhauled oil pump
(http://images.vfl.ru/ii/1422994200/4e98cca0/7676582_m.jpg) (http://vfl.ru/fotos/4e98cca07676582.html)
-
I found crankcase bearing holes egg-shaped, and need to be align bored.
(http://images.vfl.ru/ii/1422993204/b7a496e0/7676287_m.jpg) (http://vfl.ru/fotos/b7a496e07676287.html)
Both halves been milled, bolted together with APE studs, and align bored to all holes, main bearing and transmission bearing holes.
(http://images.vfl.ru/ii/1422993205/6634d00e/7676289_m.jpg) (http://vfl.ru/fotos/6634d00e7676289.html)
(http://images.vfl.ru/ii/1422993528/70b12fe9/7676416_m.jpg) (http://vfl.ru/fotos/70b12fe97676416.html)
Crankshaft balanced, polished, Carrillo rods fitted.
(http://images.vfl.ru/ii/1422993869/95eadd12/7676493_m.jpg) (http://vfl.ru/fotos/95eadd127676493.html)
-
Nice Job :thumb:
-
Your English may not be so good but your machine work looks first class!
Let us know how it runs. :thumb:
-
Thank you!
Complete engine.
(http://images.vfl.ru/ii/1422994565/71e5c761/7676647_m.jpg) (http://vfl.ru/fotos/71e5c7617676647.html)
-
Setrab oil cooler.
(http://images.vfl.ru/ii/1423071835/4920ee6b/7684636_m.jpg) (http://vfl.ru/fotos/4920ee6b7684636.html)
(http://images.vfl.ru/ii/1423071629/793a9c8a/7684614_m.jpg) (http://vfl.ru/fotos/793a9c8a7684614.html)
-
Thank you!
Complete engine.
(http://images.vfl.ru/ii/1422994565/71e5c761/7676647_m.jpg) (http://vfl.ru/fotos/71e5c7617676647.html)
Looks great, some nice work elsewhere on the bike too.
Is a street bike or race bike?
What is the power output?
-
Thank you!
Complete engine.
(http://images.vfl.ru/ii/1422994565/71e5c761/7676647_m.jpg) (http://vfl.ru/fotos/71e5c7617676647.html)
Looks great, some nice work elsewhere on the bike too.
Is a street bike or race bike?
What is the power output?
This is a street bike, unfortunately i don't have dyno anywhere in my town...
-
Aprilia RSV1000 fork, russian made forged wheels, ducati brake calipers and strange brake discs with central parts made of carbon fibre material. Titanium spindle, bolts and nuts
(http://images.vfl.ru/ii/1423252890/2862e1b3/7705070_m.jpg) (http://vfl.ru/fotos/2862e1b37705070.html)
-
Swingarm been braced using upper part taken from R1 swingarm, not best welds in the world, but cost me nothing.
(http://images.vfl.ru/ii/1423252890/89eef32a/7705069_m.jpg) (http://vfl.ru/fotos/89eef32a7705069.html)
(http://images.vfl.ru/ii/1423252890/9d71946c/7705068_m.jpg) (http://vfl.ru/fotos/9d71946c7705068.html)
-
Seeing your thread for the first time reminded me of this bike built a guy named Lee in UK.
I've seen the bike for myself it was at quite a few bike shows.
http://www.ukleenet.webspace.virginmedia.com/
-
Seeing your thread for the first time reminded me of this bike built a guy named Lee in UK.
I've seen the bike for myself it was at quite a few bike shows.
http://www.ukleenet.webspace.virginmedia.com/
Yes, i seen Lee proect before, perfect bike, i just don't have enough money to build such good bike as Lee did, i am just lathe operator, money is a big problem.
-
Seeing your thread for the first time reminded me of this bike built a guy named Lee in UK.
I've seen the bike for myself it was at quite a few bike shows.
http://www.ukleenet.webspace.virginmedia.com/
Yes, i seen Lee proect before, perfect bike, i just don't have enough money to build such good bike as Lee did, i am just lathe operator, money is a big problem.
Everyone in the UK who's seen Lee's bike woud like to have the money too :wink: :D
Please carry on showing your great work?
-
Rear brake disc, heat treated stainless steel:
(http://images.vfl.ru/ii/1423328870/a8aec0d4/7712670_m.jpg) (http://vfl.ru/fotos/a8aec0d47712670.html)
(http://images.vfl.ru/ii/1423328870/8116fc97/7712671_m.jpg) (http://vfl.ru/fotos/8116fc977712671.html)
(http://images.vfl.ru/ii/1423328870/1b0d970a/7712672_m.jpg) (http://vfl.ru/fotos/1b0d970a7712672.html)
(http://images.vfl.ru/ii/1423328870/5d3ca311/7712673_m.jpg) (http://vfl.ru/fotos/5d3ca3117712673.html)
-
Titanium sidestand:
(http://images.vfl.ru/ii/1423329336/0ba3275e/7712748_m.jpg) (http://vfl.ru/fotos/0ba3275e7712748.html)
-
What is money worth when you have engineering and fabrication skills like yours !
Fair play to you slavatokar :thumb:
-
Wow! That's nice.
I've always liked the looks of those oil/air engines.
-
:thumb: :thumb: Very nice!!!
-
Thank all!
Building titanium exhaust system, start with smashed headers:
(http://images.vfl.ru/ii/1423502277/0926799b/7735316_m.jpg) (http://vfl.ru/fotos/0926799b7735316.html)
(http://images.vfl.ru/ii/1423502277/138c0c0d/7735317_m.jpg) (http://vfl.ru/fotos/138c0c0d7735317.html)
(http://images.vfl.ru/ii/1423502278/eb956f2b/7735318_m.jpg) (http://vfl.ru/fotos/eb956f2b7735318.html)
(http://images.vfl.ru/ii/1423502278/415392eb/7735319_m.jpg) (http://vfl.ru/fotos/415392eb7735319.html)
(http://images.vfl.ru/ii/1423502279/d0866d4e/7735320_m.jpg) (http://vfl.ru/fotos/d0866d4e7735320.html)
-
(http://images.vfl.ru/ii/1424099945/6ac64c2f/7804898_m.jpg) (http://vfl.ru/fotos/6ac64c2f7804898.html)
-
Very nice!!! :thumb: :thumb:
-
looks really good....well done!
-
looks really good....well done!
Thank you!
-
Dam!!! My goal someday is a turbo carbi oil cooled 750. If i dont commit sucide trying to get the tune right.
That incredible work.
-
Bike still run good) (https://c3.staticflickr.com/1/778/21863500658_e7347d7937_z.jpg) (https://flic.kr/p/zj1a2U)DSC01360 (https://flic.kr/p/zj1a2U) by Вячеслав Филатов (https://www.flickr.com/photos/115618176@N08/), on Flickr
-
(https://c5.staticflickr.com/8/7113/26191882844_107a4d6cd7_z.jpg) (https://flic.kr/p/FUuffY)DSC01566 (https://flic.kr/p/FUuffY) by Вячеслав Филатов (https://www.flickr.com/photos/115618176@N08/), on Flickr
-
)
-
It's a beauty!
-
Any news on the bike slavatokar??
-
Hello, bike working fine, just repaint and seat repair needed. Dont have enough money to make this happen unfortunetly(